Announcement

Collapse
No announcement yet.

81 GS550T Full Rebuild...In Ohio

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    81 GS550T Full Rebuild...In Ohio

    I don't know about you but I'm never satisfied with jobs I do if I didn't do everything necessary to make it right the first time. Some of you might remember this thread from when I first bought my GS550T in Colorado and began repairing PO mistakes:

    Are you doing a restoration project of some kind on a GS? Let everyone see what you are doing by posting the details here.


    I've had many good rides and am very happy with a bike that I originally bought because it was the style I wanted and ultimately was free. This is where it is now:

















    As much as I tried to improve and make it my own, there were several things left undone. The frame needs a major facelift, my paint job on the tank was ruined from a brake fluid spill, and I found the source of an oil leak to be the base gasket and not the cam tensioner or valve cover like I thought. I also want to add a couple of "farkles" to help me keep abreast of what's going on with the bike.

    So, I decided to do a full frame restore and engine rebuild this year. I hope to be done in time for Brown County next year and am planning on taking the bike with us to Washington State when my last niece marries her fiance. My goal is to trailer the bike out and ride back the 2400 miles while the family follows in the truck.

    This time, I will have help from my 14 year old as she wants to start learning in preparation for when she gets her own bike. I'm looking forward to spending the time with her and hope we can both create some good memories in the process.

    I've already formed a basic list of items I plan on doing but I'm not totally sure which way I will go on some. I do know I'm keeping it as stock as possible (no cafe or other junk for me) and I'm not going to split the cases. Essentially, I'm going to:
    • Replace the base gasket and obviously the other top end stuff
    • Clean and repaint the engine
    • Repaint the frame
    • Fix the seat cover
    • Add in mounts for my voltmeter and 12v outlets
    • Repaint my carburetors
    • Repaint the tank and side covers with proper paint and clearcoats
    • Replace swingarm and steering head bearings
    • Replace all rusted bolts/nuts
    • Potentially replace the forks as I am not sure if what pitting I found is too much (will take and post better pictures)
    • Potentially replace the pipes depending on if I can still find the two others offered to me earlier this year
    But as I start in on this, I'm already running into some questions:
    • I know how to remove the engine from the bike, but what do most folks do for storing it until they are ready to put back in the frame?
    • When trying to clean up covers before painting, I used a wire brush on my grinder. If I decide to remove the paint, do you think I should clear the covers after I polish them? The paint job on the lower covers just hasn't sat well with me but then there are times I think they are nice...this is the main part I'm not still not decided on.
    • I have better access to a parts washer at the base auto hobby shop to clean up the engine pieces this time. What prep work should i consider doing before and after using it? I will repaint the engine but am not sure if I'll black it out or stay the silver color (these year 550s were the silver color engine).
    • For those who bought it, how do you like the sand blaster set up from Harbor Freight? I think it will help reduce some of my frame costs if I do the powdercoat route and definitely help if I paint it.
    • Since I'll already be in there, should I replace my clutch plates since they were already close to their service limits?

    Thank you for looking. More pictures will come as we start the work (Stabil was ran through the carbs tonight and bike will get torn down starting tomorrow).
    Cowboy Up or Quit. - Run Free Lou and Rest in Peace

    1981 GS550T - My First
    1981 GS550L - My Eldest Daughter's - Now Sold
    2007 GSF1250SA Bandit - My touring bike

    Sit tall in the saddle Hold your head up high
    Keep your eyes fixed where the trail meets the sky and live like you ain't afraid to die
    and don't be scared, just enjoy your ride - Chris Ledoux, "The Ride"

    #2
    Eish, Scott, two tear downs in two years, damn that bike gets a lot of lovin' or you just have an unnatural wrenching fetish
    To be very honest with you, if you are doing a frame off rebuild, that list of yours is only the beginning, the tip of the iceberg, trust me, so as our Auzzie mate Pete would say to the missus in a moment of foreplay......brace yer self Shiela.
    Nothing wrong though, I will be following with interest, as I did your first build.
    Oh by the way, how do you plan on breakng the news to your little princess that her carefully thought out and color mached blue carbs are to be relegated to the annals of history, make sure the video is running when you do, that will be a youtube moment for sure, you're a brave man Sparkie.

    Seriously, Scott, all good ideas you have thought of, but, if you are doing steering head bearings,and the frame is bare, I would do all the bearings while you are there, wheels as well.
    I must admit, I don't remember if you did them last time around, too lazy to go look.
    I have just got my motor sitting on the garage floor on a good thick piece of cardboard to it is not directly on the cement floor.
    I painted my frame with a good 2k as I thought powder coating was too expensive at the time, after buying everything to strip it and paint it, powder coating probably would have been slightly cheaper when all was said and done, except I did not have the lump sum, painting, I could spread the cost over several weeks.
    I would stay silver with the motor, but that is a personal choice you have to make.
    As I said, be ready to do a lot more than you think, once you start assembling again, remember the new shiny frame and swingarm are going to make everything else look tatty by comparison, and I know you won't be happy with putting them on your new work of art.
    Triples, headlight ears, brake calipers.......and so the list goes on, ask me how I know.
    Example; can't put these old calipers on the shiny new swingarm and forks, give them some paint, ok, while you are stripping them for paint, might as well renew the seals, good, now they are like new.
    Oh, hang on, these old brake lines, maybe I should replace them, yes.
    Newly rebuilt calipers, new lines....mmmmm, better do the master cylinder seals as well, and give it a lick of paint while I have it stripped.

    But I have no doubt she will be a looker and in superb condition when you are done with her, a keeper for sure.

    +1000000 on the quality time with the daughter, I think this rebuild is a fantastic idea, if for no other reason.
    Money can't buy those shared hours.
    Following closely.
    Last edited by Guest; 10-14-2012, 01:11 AM.

    Comment


      #3
      Originally posted by Flyboy View Post
      Eish, Scott, two tear downs in two years, damn that bike gets a lot of lovin' or you just have an unnatural wrenching fetish
      To be very honest with you, if you are doing a frame off rebuild, that list of yours is only the beginning, the tip of the iceberg, trust me, so as our Auzzie mate Pete would say to the missus in a moment of foreplay......brace yer self Shiela.
      Nothing wrong though, I will be following with interest, as I did your first build.
      Oh by the way, how do you plan on breakng the news to your little princess that her carefully thought out and color mached blue carbs are to be relegated to the annals of history, make sure the video is running when you do, that will be a youtube moment for sure, you're a brave man Sparkie.
      Aye. I do seem to have an unnatural wrenching fetish in that I am never satisfied. If I know I did something wrong or not good enough, I'm already thinking about how to fix it once the money comes back around. I think I'll do the carbs to match the tank this year so yea, she'll have to deal with it.

      And it's been three years but who's counting?

      Difference being this time, I do intend to do everything right. The next couple of months will be cleaning work only as the money isn't quite there to buy parts yet. I'm supposed to get a performance bonus from old Air Force employer, but the VA and the Air Force have spent the last 6 months squabbling over how it will get paid instead of just giving it to me. Once that money comes in, I will order most of my gaskets and then budget in the money each payday to spend on the seat, powder coating, etc.

      Seriously, Scott, all good ideas you have thought of, but, if you are doing steering head bearings,and the frame is bare, I would do all the bearings while you are there, wheels as well.
      I must admit, I don't remember if you did them last time around, too lazy to go look.
      Yep, wheel bearings done last year. Do you think I should do them again?

      I have just got my motor sitting on the garage floor on a good thick piece of cardboard to it is not directly on the cement floor.
      Thank you...good to know.

      As I said, be ready to do a lot more than you think, once you start assembling again, remember the new shiny frame and swingarm are going to make everything else look tatty by comparison, and I know you won't be happy with putting them on your new work of art.
      Triples, headlight ears, brake calipers.......and so the list goes on, ask me how I know.
      Example; can't put these old calipers on the shiny new swingarm and forks, give them some paint, ok, while you are stripping them for paint, might as well renew the seals, good, now they are like new.
      Yep, already in the mind's eye to do. I'll strip the paint off of them over the next few months and then decide where I'm going with the paint later.

      But I have no doubt she will be a looker and in superb condition when you are done with her, a keeper for sure.
      I sure hope so...I'd like to really do it right this time so I just need to slow down and not rush through it.
      Cowboy Up or Quit. - Run Free Lou and Rest in Peace

      1981 GS550T - My First
      1981 GS550L - My Eldest Daughter's - Now Sold
      2007 GSF1250SA Bandit - My touring bike

      Sit tall in the saddle Hold your head up high
      Keep your eyes fixed where the trail meets the sky and live like you ain't afraid to die
      and don't be scared, just enjoy your ride - Chris Ledoux, "The Ride"

      Comment


        #4
        Yep, wheel bearings done last year. Do you think I should do them again?
        Nope.

        Relax Scott, you will do a super job, and I know all about skimming off the grocery money for a seal here and a gasket there....hehehe all part of the fun.

        Comment


          #5
          End of Day One

          Charmayne, Cheyenne and I started in on the bike late this afternoon and only spent about three hours due to other issues but we put a good start into things. While Cheyenne seemed to enjoy playing tool and parts monkey, Charmayne jumped at the chance of wrenching more enthusiastically than I thought she might by squealing with joy at removing the oil pan bolt. After checking the bolt head against the socket size, it only took another long minute to figure which way is lefty loosey on the ratchet and out came the oil. She also learned how to use the penetrating fluid spray so exhaust pipes and all four footpegs came off without busting bolts.

          After we removed the carburetors and the air intake manifold though, things came to a quick stop as I couldn't find my label maker tape to mark the wiring harness connections. I'll get some tomorrow and then we can remove the harness and remainder of the airbox.

          A couple of pictures from today.

          Parts labeled, put in ziploc bags, and stored in the parts bin.


          Where we finished for the evening

          Cowboy Up or Quit. - Run Free Lou and Rest in Peace

          1981 GS550T - My First
          1981 GS550L - My Eldest Daughter's - Now Sold
          2007 GSF1250SA Bandit - My touring bike

          Sit tall in the saddle Hold your head up high
          Keep your eyes fixed where the trail meets the sky and live like you ain't afraid to die
          and don't be scared, just enjoy your ride - Chris Ledoux, "The Ride"

          Comment


            #6
            I didn't realize until today, yes even with the pictures I took Friday, that the chrome side cover came off my left hand cover probably the week before last. Since this isn't sold still, does anyone have one I can buy? I'm looking on Ebay and one other place just in case.
            Cowboy Up or Quit. - Run Free Lou and Rest in Peace

            1981 GS550T - My First
            1981 GS550L - My Eldest Daughter's - Now Sold
            2007 GSF1250SA Bandit - My touring bike

            Sit tall in the saddle Hold your head up high
            Keep your eyes fixed where the trail meets the sky and live like you ain't afraid to die
            and don't be scared, just enjoy your ride - Chris Ledoux, "The Ride"

            Comment


              #7
              Scott, what paint did you use on that front right caliper? I want to make mine invisible too.

              I'll try to remember to check with my brother on the side cover issue. He also has a 550T, and may have spares.
              Dogma
              --
              O LORD, be gracious to me; heal me, for I have sinned against you! - David

              Skeptical scrutiny is the means, in both science and religion, by which deep insights can be winnowed from deep nonsense. - Carl Sagan

              --
              '80 GS850 GLT
              '80 GS1000 GT
              '01 ZRX1200R

              How to get a "What's New" feed without the Vortex, and without permanently quitting the Vortex

              Comment


                #8
                Originally posted by Dogma View Post
                Scott, what paint did you use on that front right caliper? I want to make mine invisible too.

                I'll try to remember to check with my brother on the side cover issue. He also has a 550T, and may have spares.
                It was that new super hi-tech clearcoat made by you know who

                Yea that caliper came off last week when we found the leak and led to me starting this project a bit earlier than I originally planned. Course after thinking how long it took last year I'm glad I am. Fortunately I have a garage now and have no excuse when the bad weather hits
                Cowboy Up or Quit. - Run Free Lou and Rest in Peace

                1981 GS550T - My First
                1981 GS550L - My Eldest Daughter's - Now Sold
                2007 GSF1250SA Bandit - My touring bike

                Sit tall in the saddle Hold your head up high
                Keep your eyes fixed where the trail meets the sky and live like you ain't afraid to die
                and don't be scared, just enjoy your ride - Chris Ledoux, "The Ride"

                Comment


                  #9
                  I think we've exchanged messages before, but if you have questions about the 550T, you can find lots of pics in my '81 550T cafe thread.

                  Like you, I decided to rebuild pretty much everything. It's a big job, although your bike is in MUCH better condition than mine was. Once you pull the head and cylinders, you'll want to measure the cylinders/pistons, replace the rings, deglaze the cylinder walls (all easy enough to do) and check the valve springs and valve seating.

                  Looking forward to following your thread.

                  Comment


                    #10
                    The end of day 2 brought a few more things done and a couple of more items added to my list (gee Stan, thanks for jinxing me) to fix.

                    Although Cheyenne had school work to do, Charmayne lucked out some how and didn't have any homework (need to call her 8th grade teachers about that). So after I got off work and bought new labelmaker tape, we marked the ends of the harness that will be hard to distinguish when we put it back on later. In the process, I discovered my heat shrinking ability over the neutral indicator wire prevented me from taking the connector apart correctly. Also, we found the headlight plug I fixed earlier this summer will need another repair as the insulation scraped on something in the bucket exposing the copper wire.

                    We removed the entire harness, airbox, battery box, and rear fender (to include the turn signals and seat bracket). I'd say we'll have the rear wheel and most of the front end off tomorrow night and then I can start figuring out how to get the engine out of the frame by this weekend.

                    Busted headlight plug:



                    Charmayne removing the rear brake reservoir



                    Where the bike sits now:



                    And Charmayne proudly showing off her dirty hands:

                    Cowboy Up or Quit. - Run Free Lou and Rest in Peace

                    1981 GS550T - My First
                    1981 GS550L - My Eldest Daughter's - Now Sold
                    2007 GSF1250SA Bandit - My touring bike

                    Sit tall in the saddle Hold your head up high
                    Keep your eyes fixed where the trail meets the sky and live like you ain't afraid to die
                    and don't be scared, just enjoy your ride - Chris Ledoux, "The Ride"

                    Comment


                      #11
                      I was by myself tonight as both girls had a lot of homework. I managed to remove the left caliper, the entire clock area, and the coils. This is leaving me to only need to remove the wheels and I can drop the bike down to remove the frame. Still finding little things that will need replacing or cleaning so I intend to go through each item piece by piece starting this weekend.

                      Here we sit:

                      Cowboy Up or Quit. - Run Free Lou and Rest in Peace

                      1981 GS550T - My First
                      1981 GS550L - My Eldest Daughter's - Now Sold
                      2007 GSF1250SA Bandit - My touring bike

                      Sit tall in the saddle Hold your head up high
                      Keep your eyes fixed where the trail meets the sky and live like you ain't afraid to die
                      and don't be scared, just enjoy your ride - Chris Ledoux, "The Ride"

                      Comment


                        #12
                        Lookin good!
                        You are gonna kick a$$ on this rebuild. What you really have going for you is that the bike is not a rust bucket that has been sitting for 10 years. You will save a lot of time not having to remove gobs of rust and aluminum corrosion. Some paint removal and prep work and you will be painting and reassembling a rolling chassis before you know it.
                        As you said, you really like this bike and this will be the makeover you really wanted to do. Happy for ya
                        (are you laying in bed awake at night thinking of color schemes?)lol

                        Comment


                          #13
                          Thanks Loud ET, not color schemes but of getting the work done and making it look nice, dreaming of painting it myself but then having the powdercoat look too. What parts and tools I should get to help out, etc.
                          Cowboy Up or Quit. - Run Free Lou and Rest in Peace

                          1981 GS550T - My First
                          1981 GS550L - My Eldest Daughter's - Now Sold
                          2007 GSF1250SA Bandit - My touring bike

                          Sit tall in the saddle Hold your head up high
                          Keep your eyes fixed where the trail meets the sky and live like you ain't afraid to die
                          and don't be scared, just enjoy your ride - Chris Ledoux, "The Ride"

                          Comment


                            #14
                            I did a frame up job on my 1100. One major thing I would do different is to have powdercoated the frame and a few other bits. I did Two coats of primer, 3 coats of paint and two or three coats of semi gloss clear coat. It looks very good. But there are sooo many angles to hit all the tubes and nooks/crannies, it takes a lot of product to be satisfied that you have covered it well.
                            I used rattlecan. It is NOT a very durable finish. So after all that work and effort, just fitting parts and testfitting stuff, it actually scratches way to easily. I plan on keeping this bike for quite a while. I hate to think that in a few years of seeing rust bubbles or rust where the frame has taken a few scratches.
                            On my next masterpeice, ie: bike I intend to do frame up that I intend to make REAAALLLY nice and own for a long time, I will definately powdercoat for long life and good looks.
                            We look forever to find a good bike for 5,6,700 bucks that we see has lots of potential and its hard to swallow the fact its gonna take a big chunk of cashola just to powder coat the bike and paint the body up real nice. haha Probably 2-400 bucks for all that. ha ha
                            Yep, we crazy.
                            Like I said, lots of paint and polish and you have most of what you need to have a great, completely fresh and clean bike.
                            STILL NEEDrings, flex hone, valve seals, engine gaskets, valve lapping tool/compound, other engine bits, engine paint, paint stripper, sanding supplies, abrasive tools, more tools, more gaskets, on and on. lol)
                            All those trips to the parts store for a little pack of spade connectors end up being 25 dollar trips. lol

                            Comment


                              #15
                              I'm almost there

                              The bike is now on the ground and about two hours from being completely bare frame; just need to find a suitable stand/seating for the engine. After getting the rear wheel and fighting to remove the handlebar grips (WD40 worked perfectly), we were at the point we could remove the front wheel and forks. But we had one problem - the rear end would lift up every time I tried to jack up the front, even with the jack barely under the oil filter housing. Even throwing my cargo straps up and over the rafters came up too short. However, I finally figured out my best counterweight of all and called Justin out to help pull the tire away from the bike (Cheyenne and Helena ran to the store because my daughter's growing up). Pictures below.

                              Showing Charmayne how to remove the circlip over the gear shift lever



                              Cheyenne caught me by surprise



                              Rear end on the ground



                              My great counterweight idea...and it worked beautifully



                              On the ground



                              Inside of steering neck



                              Upper steering bearing



                              Lower triple tree and bearing



                              Now to remove the crash bars, lay it down, and pull the frame up and off.
                              Cowboy Up or Quit. - Run Free Lou and Rest in Peace

                              1981 GS550T - My First
                              1981 GS550L - My Eldest Daughter's - Now Sold
                              2007 GSF1250SA Bandit - My touring bike

                              Sit tall in the saddle Hold your head up high
                              Keep your eyes fixed where the trail meets the sky and live like you ain't afraid to die
                              and don't be scared, just enjoy your ride - Chris Ledoux, "The Ride"

                              Comment

                              Working...
                              X