Announcement

Collapse
No announcement yet.

1980 GS1000S Reluctant Rebuild

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    1980 GS1000S Reluctant Rebuild

    Edit, If you have just found this thread and cannot see the pictures you can install this add-on if you are using chrome and you will be able to view the pictures.

    https://chrome.google.com/webstore/detail/photobucket-embedded-imag/ogipgokcopooepeipngiikdkpmcpkaon

    I was full of hope and excitement to take delivery of my newly acquired GS1000S.

    At the time of delivery I was still finishing up two other GS’s and needed to make some room so I could work on the “S”. As it turned out two of the guys who looked at the GS1150EF had spare parts for an “S” and kindly offered the parts for free, that was when things started to look more promising.
    Once I had more room to get to work on the “S” I made the decision to take it all the way down to the frame. Wow they sure come apart fast, think it was only a few hours and I had the entire bike apart and another hour or so to remove the engine.
    Now a normal bright guy would grab his camera and take a lot of shots of the bike as it came apart, well I was not normal or bright as it seems, I didn’t take many pictures that will help with the reassembly, so I have a 2000 piece jigsaw puzzle that has an added twist to the conventional puzzle, with a motorcycle when you forget to install some piece, you don’t just put it in place, you pull the entire thing apart because it will always be the one piece that goes in first. Ask me how I know this?
    Well now that it’s all apart and scattered all over the floor of my garage, I got busy and ordered up a bunch of parts from Z1 & Boulevard, Vintage Connections etc. Chain, Sprockets, Headlight Bucket & Trim, Brake Caliper Rebuild Kits, Rubber Grommets, various Screws, Bolts and Washers and anything that was damaged or mangled and there was plenty.
    Why use a socket or ring spanner on that nice chromed nut when a set of channel lock pliers works perfectly well? Who knew some of the bolts for the side covers were different lengths, doesn’t really matter does it? they all fit sort of if you tighten them enough.
    I’m very familiar with the name Heli-coil and now have an extensive collection of sizes.
    I am also on a first name basis with Brent (parts guy) at Boulevard Suzuki as I was placing an order every week or so and it took a few calls to get the online ordering sorted, with my Canadian CC and a US shipping address.
    Here’s a few pictures from delivery and some random pictures the bike in pieces and some of the damaged parts I found during disassembly.






    Melted wires



    Very Rusty Tank
    Last edited by Kiwi Canuck; 11-23-2017, 02:24 AM.
    2018 Honda Africa Twin AS
    2013 DR 650 Grey, sold 1981 GS 650E Silver,

    1980 GS1000ST Blue & White, X2

    2012 DL650 Vstrom Foxy Orange, in storage
    1981 CT110 X2 "Postie Bikes" Gone to a New Home.
    2002 BMW 1150 GS Blue & White - Sold
    1975 BMW R90/6 Black - Sold 1984 GS1150EF Sold
    1982 BMW R100 Africa trip, Stolen - Recovered- Sold
    1977-1980 Suzuki GS550, GS1000E, GS1000S GSX750, GSX1100,s
    Hondas ST90, CR125 CB175 , CB350 CB750, NSU Quickly, Yamaha RD's 350/400,

    #2
    I haven't read any of your posts lately and I'm glad to see your on task.
    sigpic
    83 GS1100g
    2006 Triumph Sprint ST 1050

    Ohhhh!........Torque sweet Temptress.........always whispering.... a murmuring Siren

    Comment


      #3
      So, how far do I go with this restoration/rebuild, I ordered quite a few parts that were nice to have but not absolutely necessary, like the Rear Fender and the Footrests, and a few other parts (oh yes, the new Left Mirror) but I was in spending mode and nothing was going to get in my way of making this the best I can make it.

      Until the reality of how much this could cost and how much work this is to do at a high level. I now have even more respect for the guys who are doing these massive rebuilds and staying with it even after more than a year or so.

      Even though I do enjoy working on the bike, it is a bit daunting some days just looking at the bike laying in pieces and in boxes all over the garage.

      It may not seem like a big deal but many of the parts sold by Suzuki listed with substituted part numbers are similar but not same as the original. Example, the emblems for the engine side covers, new ones now come with silver background and gold lettering, (original is black background and sliver raised lettering). The footrests are square topped rather than rounded and a few other items I got have the wrong colour finish, and as I’m trying to keep it as original as possible, I will probably just stay with the original parts and clean them up a bit, not sure about the engine side cover emblems though as nothing will look right except the orginals and mine are rough.



      A disassembled dirty engine, should have cleaned it better before I pulled it apart, now how do I clean it without spending the entire day on it and getting grit all in the engine?
      After 2 weeks of procrastenating I ended up bagging the top of the motor and using Simple Green and a stiff plastic brush and then power washing it.



      Here's the result after 2 applications of Simple Green applied full strength.




      After a good cleaning, some new paint on the oil pan, VHT SP127 and a new gasket fitted.
      Last edited by Kiwi Canuck; 06-01-2013, 06:29 PM.
      2018 Honda Africa Twin AS
      2013 DR 650 Grey, sold 1981 GS 650E Silver,

      1980 GS1000ST Blue & White, X2

      2012 DL650 Vstrom Foxy Orange, in storage
      1981 CT110 X2 "Postie Bikes" Gone to a New Home.
      2002 BMW 1150 GS Blue & White - Sold
      1975 BMW R90/6 Black - Sold 1984 GS1150EF Sold
      1982 BMW R100 Africa trip, Stolen - Recovered- Sold
      1977-1980 Suzuki GS550, GS1000E, GS1000S GSX750, GSX1100,s
      Hondas ST90, CR125 CB175 , CB350 CB750, NSU Quickly, Yamaha RD's 350/400,

      Comment


        #4
        Got me a Metal Polisher

        I got a bunch of parts vapour blasted, engine side covers, valve cover, wheel spacers, rear wheel hub, chain adjusters and forks.
        When I got them home I gave the side covers a coat of Clear Satin VHT (SP115). After a day or so they really darkened up and didn't look too good, so I bought a polisher and gave them heck for a while, here's what one of them looks like now.



        I bought some VHT Clear Gloss (SP730) which is actually caliper paint and used it on the forks and it looks great. I will try spraying the polished parts with the Gloss to see how it looks.

        Also got a few goodies from Vintage Connections to replace the melted connectors and butchered wiring and also ordered some of their 3M black tape, it works awesome and leaves a very professional looking job. Anyway I am happy with the look of it and it was easy to work with.

        2018 Honda Africa Twin AS
        2013 DR 650 Grey, sold 1981 GS 650E Silver,

        1980 GS1000ST Blue & White, X2

        2012 DL650 Vstrom Foxy Orange, in storage
        1981 CT110 X2 "Postie Bikes" Gone to a New Home.
        2002 BMW 1150 GS Blue & White - Sold
        1975 BMW R90/6 Black - Sold 1984 GS1150EF Sold
        1982 BMW R100 Africa trip, Stolen - Recovered- Sold
        1977-1980 Suzuki GS550, GS1000E, GS1000S GSX750, GSX1100,s
        Hondas ST90, CR125 CB175 , CB350 CB750, NSU Quickly, Yamaha RD's 350/400,

        Comment


          #5
          Excellent, another rebuild to follow.
          When you say the cover darkened up after a couple days, was it just the paint curing or do you think the soda blasting may have altered the surface?
          2@ \'78 GS1000

          Comment


            #6
            Looking good David. I feel your pain about staring at what feels like an eternity of work but in time it will all pay off and start to feel like you're actually getting somewhere. If you find a clear coat that holds up to gas you let me know, I've tried several different ones that I can get here and no luck yet.
            Rob
            1983 1100ES, 98' ST1100, 02' DR-Z400E and a few other 'bits and pieces'
            Are you on the GSR Google Earth Map yet? http://www.thegsresources.com/_forum...d.php?t=170533

            Comment


              #7
              Nice, subscribed

              Comment


                #8
                Boy, sure looks like a nice starting point. Anxious to follow the progress.
                1979 GS1000S,

                1982 Honda CX500 Turbo, 1982 Honda MB5 w/CR80 motor, 1977 Honda "nekid" Goldwing, 1976 Honda CB550F cafe', 1972 Honda XL250 cafe'

                Comment


                  #9
                  Originally posted by steve murdoch View Post
                  Excellent, another rebuild to follow.
                  When you say the cover darkened up after a couple days, was it just the paint curing or do you think the soda blasting may have altered the surface?
                  The vapour blasting which uses very fine glass bead in a water slurry leaves a very fine finish and makes rubber and plastic look new again. The aluminum has a very fine texturered finish which masks any scratches so i thought satin clear would work better, not sure why it went dark, but when I used gloss clear on the forks it looks more like the factory finish and didn't darken at all.

                  I will post some pictures in one of my next updates to see both samples.
                  2018 Honda Africa Twin AS
                  2013 DR 650 Grey, sold 1981 GS 650E Silver,

                  1980 GS1000ST Blue & White, X2

                  2012 DL650 Vstrom Foxy Orange, in storage
                  1981 CT110 X2 "Postie Bikes" Gone to a New Home.
                  2002 BMW 1150 GS Blue & White - Sold
                  1975 BMW R90/6 Black - Sold 1984 GS1150EF Sold
                  1982 BMW R100 Africa trip, Stolen - Recovered- Sold
                  1977-1980 Suzuki GS550, GS1000E, GS1000S GSX750, GSX1100,s
                  Hondas ST90, CR125 CB175 , CB350 CB750, NSU Quickly, Yamaha RD's 350/400,

                  Comment


                    #10
                    Originally posted by nvr2old View Post
                    Boy, sure looks like a nice starting point. Anxious to follow the progress.
                    Thanks Larry,
                    2018 Honda Africa Twin AS
                    2013 DR 650 Grey, sold 1981 GS 650E Silver,

                    1980 GS1000ST Blue & White, X2

                    2012 DL650 Vstrom Foxy Orange, in storage
                    1981 CT110 X2 "Postie Bikes" Gone to a New Home.
                    2002 BMW 1150 GS Blue & White - Sold
                    1975 BMW R90/6 Black - Sold 1984 GS1150EF Sold
                    1982 BMW R100 Africa trip, Stolen - Recovered- Sold
                    1977-1980 Suzuki GS550, GS1000E, GS1000S GSX750, GSX1100,s
                    Hondas ST90, CR125 CB175 , CB350 CB750, NSU Quickly, Yamaha RD's 350/400,

                    Comment


                      #11
                      A picture of the parts that I had Vapour Blasted after I had sprayed the valve cover and the rear hub with VHT SP115 Satin Clear. (the top cap was painted with SP127 silver) See how it's quite a bit darker than the side covers, I sprayed them later and they went even darker, so I stripped them with paint stripper and then gave them a good polishing.




                      Here's the side cover decals, any ideas as to where to find a set of original Black & Sliver?
                      2018 Honda Africa Twin AS
                      2013 DR 650 Grey, sold 1981 GS 650E Silver,

                      1980 GS1000ST Blue & White, X2

                      2012 DL650 Vstrom Foxy Orange, in storage
                      1981 CT110 X2 "Postie Bikes" Gone to a New Home.
                      2002 BMW 1150 GS Blue & White - Sold
                      1975 BMW R90/6 Black - Sold 1984 GS1150EF Sold
                      1982 BMW R100 Africa trip, Stolen - Recovered- Sold
                      1977-1980 Suzuki GS550, GS1000E, GS1000S GSX750, GSX1100,s
                      Hondas ST90, CR125 CB175 , CB350 CB750, NSU Quickly, Yamaha RD's 350/400,

                      Comment


                        #12
                        Only place to find those black decals is ebay now, unless someone on here has one.
                        Rob
                        1983 1100ES, 98' ST1100, 02' DR-Z400E and a few other 'bits and pieces'
                        Are you on the GSR Google Earth Map yet? http://www.thegsresources.com/_forum...d.php?t=170533

                        Comment


                          #13
                          Starting the reassembly, received a nice batch of parts, I first painted the frame where it had a few wear spots and around the battery holder, the acid had damaged the paint, I sanded with 280 Wet & Dry and then 600 Wet & Dry to give it a nice finish. After cleaning it and drying it with a blow dryer I painted it with VHT Roll Bar & Chassis Paint, Gloss Black SP670) It was a perfect match.
                          Then installed the new rear fenders and then the turn signals and the new License Plate Holder (still on the floor in this picture) thanks to MS Kiwi who sent it to me, I painted with VHT SP671 Satin Black and it looks like an excellent match to the original finish.

                          I love VHT paint, but I always use a new can for final finishing as it seems to come out better the first few times I use it.



                          Next I fitted the rear light assembly after throughly cleaning it and replacing the lens with a new one.



                          Making progress, installed the handle bars and the left and right switch controls, both new as the old ones had melted wiring and evidence of bodged repairs so I would rather not deal with that, also installed the front turn signals.
                          I placed the tank and one side cover on just so it looks like I'm making progress, makes me feel better when I walk in the garage and see it's almost finished.

                          Last edited by Kiwi Canuck; 06-15-2013, 01:06 AM.
                          2018 Honda Africa Twin AS
                          2013 DR 650 Grey, sold 1981 GS 650E Silver,

                          1980 GS1000ST Blue & White, X2

                          2012 DL650 Vstrom Foxy Orange, in storage
                          1981 CT110 X2 "Postie Bikes" Gone to a New Home.
                          2002 BMW 1150 GS Blue & White - Sold
                          1975 BMW R90/6 Black - Sold 1984 GS1150EF Sold
                          1982 BMW R100 Africa trip, Stolen - Recovered- Sold
                          1977-1980 Suzuki GS550, GS1000E, GS1000S GSX750, GSX1100,s
                          Hondas ST90, CR125 CB175 , CB350 CB750, NSU Quickly, Yamaha RD's 350/400,

                          Comment


                            #14
                            Nice project old mate .
                            Mine was much more piggly than yours . It cost me heaps more than I expected before it was finished (I stopped keeping track about half way through 'cause it was freaking me out) .
                            Worth it though .
                            You'll end up with a very classy classic that's a whole $hitload of fun to ride and , reliable those old girls .
                            I do an annual 10 to 12,000 kilometre ride (to Phillip Island) . Broke a clutch cable , ... once , and got a flat tyre , ........ once .

                            I know it's a bit of a wank putting a pic of my bike in your thread , but , inspiration ? You'll see that she's not perzactly correct but the bits I need will turn up one day . I'd put the incorrect Cover Decals on while you keep an eye out for the correct ones .




                            Have fun .

                            Cheers , Simon .
                            Last edited by simon kuether; 06-01-2013, 11:46 PM.


                            '79 GS1000S my daily ride in Aus

                            '82 (x2) GS650ET in the shed

                            Comment


                              #15
                              Fitted the tires

                              Got a set of Road Riders from SW Moto in Arizona, 3.25-19 Front & 4.00-18 Rear, cleaned up the rims best I could without spending a whole day on each, my arms just about seized up from so much work.

                              I think the PO had used rebar as a tire iron as there was so much damage to the rims, I used simple green and 320 Wet & Dry on the rims to try and take down the sharp gouges and clean up the grime.

                              I fitted the new tires without needing to use tire irons, just hands and the heal of my boot to get the last part in.
                              I was pleased, guess all those years of changing tires when racing has paid off.
                              Even the valve on the tube just popped out the hole, I used a HD tube on the rear as that was all I had and I applied some lube to the tire and rim and pumped it up to about 60 PSI to seat the bead.

                              Last edited by Kiwi Canuck; 01-15-2014, 05:43 PM.
                              2018 Honda Africa Twin AS
                              2013 DR 650 Grey, sold 1981 GS 650E Silver,

                              1980 GS1000ST Blue & White, X2

                              2012 DL650 Vstrom Foxy Orange, in storage
                              1981 CT110 X2 "Postie Bikes" Gone to a New Home.
                              2002 BMW 1150 GS Blue & White - Sold
                              1975 BMW R90/6 Black - Sold 1984 GS1150EF Sold
                              1982 BMW R100 Africa trip, Stolen - Recovered- Sold
                              1977-1980 Suzuki GS550, GS1000E, GS1000S GSX750, GSX1100,s
                              Hondas ST90, CR125 CB175 , CB350 CB750, NSU Quickly, Yamaha RD's 350/400,

                              Comment

                              Working...
                              X