Announcement

Collapse
No announcement yet.

GSX400F hanging idle issues, losing the plot

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    You might want to go through the Newbie Mistakes thread linked in my signature. Maintenance is good.

    Oh, and plugged idle circuits won't cause a hanging idle.
    Ed

    To measure is to know.

    Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

    Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

    Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

    KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

    Comment


      #17
      Originally posted by Nessism View Post
      You might want to go through the Newbie Mistakes thread linked in my signature. Maintenance is good.

      Oh, and plugged idle circuits won't cause a hanging idle.
      What newbie mistake did I make? I've only had the bike a week so can hardly be called out for lack of maintenance yet!

      Comment


        #18
        Originally posted by Kayak23 View Post
        What newbie mistake did I make? I've only had the bike a week so can hardly be called out for lack of maintenance yet!
        Did you read the thread? For one it calls out for replacing the intake boot O-rings.
        Ed

        To measure is to know.

        Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

        Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

        Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

        KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

        Comment


          #19
          Originally posted by Nessism View Post
          Did you read the thread? For one it calls out for replacing the intake boot O-rings.
          Uuhh yeah, but you know, until I actually found evidence that something might suggest they needed replacing I thought it better to keep an open mind..I've been trying the carb spray for a few days without any apparent change in revs.

          I wasn't finding anything that would suggest they were leaking until today, and new O-rings were only suggested yesterday. Did you read the thread?

          Hopefully it is an O-ring, but it seems strange that it's so intermittent. Fingers crossed they arrive soon and I can rule it out.
          Last edited by Guest; 06-10-2017, 06:24 PM.

          Comment


            #20
            Leaking intake boot O-rings are one of the most common of all GS issues. I change them first thing every time I get a new GS as preventative maintenance. Same thing for the carb O-rings. They rot and deteriorate, particularly the O-rings on the fuel transfer tubes. Did you take the carbs fully apart, ungang them? You can't replace the transfer tube O-rings otherwise.
            Ed

            To measure is to know.

            Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

            Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

            Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

            KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

            Comment


              #21
              Originally posted by Kayak23 View Post
              It's a 4 cylinder and I hope it has O-rings as I've just ordered some

              I put it back together again today, checked and double checked all the rubber bits, disconnected the throttle and started it up.

              I got it to idle and then went nuts with the carb spray. I found that one of the boots I was definitely getting a slowing of revs when I directed the spray behind the boot where the O-ring would be.

              So, I'm hoping that changing the O-rings will cure it. Fingers crossed. I would have ordered rubbers too but they were £30 each and to be honest I reckon the ones on there are spot on. It's more the O-ring perhaps leaking than the rubber.

              Strangely though I've just taken it for about forty miles and it totally behaved with virtually no hanging idle.

              Weird ......but anyway, I'm really hoping the O-rings are the cause.
              oops,
              is it a 16 valve motor?
              GSX1300R NT650 XV535

              Comment


                #22
                Originally posted by Nessism View Post
                Leaking intake boot O-rings are one of the most common of all GS issues. I change them first thing every time I get a new GS as preventative maintenance. Same thing for the carb O-rings. They rot and deteriorate, particularly the O-rings on the fuel transfer tubes. Did you take the carbs fully apart, ungang them? You can't replace the transfer tube O-rings otherwise.
                No, I didn't ungang them, but I guess it's not too late to seeing as I've to take them off again to get to the boots.

                Anything else you'd suggest doing while I'm in there poking around again?


                is it a 16 valve motor?
                Aye, it is.

                Comment


                  #23
                  So the bike generally has been running ok and I don't appear to be having the same hanging idle issue as before I fitted the new intake O-rings.

                  Along with some other kit to tune it up and get it running better I bought a compression tester.

                  Testing each cylinder I got 90,40,65,75...

                  I'm thinking that there is something weird going on as you'd think the bike probably wouldn't even start on those numbers!

                  Warm engine, throttle wide open.

                  I put teaspoon of oil in the worst cylinder and it bought it up to about 75, suggesting the rings might be bad.

                  Thing is, this bike has only done 16k. Surely the rings wouldn't have given up just yet?

                  Next step is maybe get a 'leakdown' testing kit to further isolate any issues.

                  The strange thing in all of this is that it actually runs relatively well except an unreliable idle.

                  Frustrating stuff

                  Comment


                    #24
                    How long since the last valve adjustment?
                    Ed

                    To measure is to know.

                    Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

                    Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

                    Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

                    KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

                    Comment


                      #25
                      No idea to be honest. Only had the bike a few weeks.

                      I've got a leak down kit on order and I'll be checking the valves once I watch enough YouTube tutorials to feel happy tackling it!

                      I reseated the valves on my mini back in the day and it actually worked again so hopefully I can do it right.

                      Main thing is finding parts for these like gaskets etc, so if anyone can recommend a good source I'd appreciate it.

                      Comment


                        #26
                        I provided a link to the Newbie Mistakes thread one day after your first post in this thread yet it's obvious that you have not gone through it and/or ignored the advice. Your frustration is at least partly your own doing.
                        Last edited by Nessism; 06-26-2017, 09:58 AM.
                        Ed

                        To measure is to know.

                        Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

                        Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

                        Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

                        KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

                        Comment


                          #27
                          Originally posted by Nessism View Post
                          I provided a link to the Newbie Mistakes thread one day after your first post in this thread yet it's obvious that you have not gone through it and/or ignored the advice. Your frustration is at least partly your own doing.
                          That's me told!
                          I've been through your thread and it was very nice I thought. This is a forum though and they are good for garnering lots of opinions generally. I'll go through it again though seeing as you're getting a bit cross with me.

                          Comment


                            #28
                            So, leakdown test results just in.

                            I hope I don't offend Nessism again with this post but here's what I found.
                            Test done on stone cold engine.

                            Cylinder 1
                            Gauge shows less than 10% leakage but rises when compressor motor kicks in. Under 20% at peak.
                            Air loss can be heard all around the removed rocker cover and at the oil filler cap.
                            No air loss detected at airbox or exhaust.

                            Cylinder 2 (the one that read the lowest in my earlier compression test)
                            15% on gauge rising to about 22% on compressor motor.
                            Same air loss heard around rocker and at oil filler cap.
                            Air loss heard at airbox when throttle opened. No loss at exhaust.

                            Cylinder 3
                            Low loss reading on gauge, maybe 10%ish.
                            No loss heard at exhaust or airbox.

                            Cylinder 4
                            Low gauge reading again for loss.
                            Seems a little quieter around rocker.
                            Seems a touch louder at oil filler.
                            Nothing at airbox or exhaust.

                            So it seems like the intake valve on cylinder 3 isn't seating right? I suppose my next course of action is taking the head off and sorting the valve seating.

                            I adjusted all the valve clearances while I was in there and it seems to run smoother I'm sure but still not quite firing into life like I hoped.

                            So ultimately, am I likely to do lots of damage if I ride it as is?

                            Cheers.

                            Comment


                              #29
                              What's the status now overall on the bike ?

                              What solved the high idle ?
                              Last edited by ukjules; 07-01-2017, 12:18 PM.
                              UKJULES
                              ---------------------------------
                              Owner of following bikes:
                              1980 Suzuki GS550ET
                              1977 Yamaha RD 250D
                              1982 Kawasaki GPZ 750 R1
                              1980 Suzuki GSX 250E

                              Comment


                                #30
                                Not too sure if the high idle is solved. It's certainly not doing it as much but I'd describe the idle as erratic now.
                                It's very sensitive to idle adjustment and will often be too high, to the point that it feels like I have no engine braking, or the other way so the bike just fizzles out at traffic lights etc.

                                Strangely it seems to go pretty well. Just got back from a blast and it's generally ok, but still dies if you don't nurse the idle.

                                Comment

                                Working...
                                X