Announcement

Collapse
No announcement yet.

Fat Front Tire

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Fat Front Tire

    What would be the biggest tire size (on stock wheel) width wise, I could fit between the front fork legs of my 80 GS1000L? I'm making my bike into a bobber and have reached a point where as I need to get some new white walls! I will most likely NOT be running a front fender.

    Thanks for any info or pics!
    Last edited by Guest; 04-07-2010, 09:50 PM.

    #2
    You can slam a 110 tire on the stock rim but it's really pushing it due to rim width. At 100 is a better fit.
    Ed

    To measure is to know.

    Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

    Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

    Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

    KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

    Comment


      #3
      Greetings and Salutations!!

      Hi Mr. gs101,

      I use a 110 up front on my 850. It works fine and corrects my speedo error. But a 100 would steer a little quicker.

      I just stopped by to welcome you to the forum.

      If there's anything you'd like to know about the Suzuki GS model bikes, and most others actually, you've come to the right place. There's a lot of knowledge and experience here in the community. Come on in and let me say "HOoooowwwDY!"....

      Here is your very own magical, mystical, mythical, mind-expanding "mega-welcome". Please take notice of the "Top 10 Common Issues", the Carb Rebuild Series, and the Stator Papers. Now let me roll out the welcome mat for you...

      Please click here for your mega-welcome, chock full of tips, suggestions, links to vendors, and other information. Then feel free to visit my little BikeCliff website where I've been collecting the wisdom of this generous community. Don't forget, we like pictures! Not you, your bike!

      Thanks for joining us. Keep us informed.

      Thank you for your indulgence,

      BassCliff

      Comment


        #4
        Originally posted by BassCliff View Post
        I use a 110 up front on my 850. It works fine and corrects my speedo error.
        Interresting.

        I believe the stock size calls for a 90/90 up front, I have installed 100/90 to correct the speedo.
        Now you say you have installed a 110? I wonder what's going on.

        .
        sigpic
        mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
        hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
        #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
        #2 son: 1980 GS1000G
        Family Portrait
        Siblings and Spouses
        Mom's first ride
        Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
        (Click on my username in the upper-left corner for e-mail info.)

        Comment


          #5
          Hmmm, this is getting curious-er and curious-er.

          I always thought the "stock" size was a 100/90/19 for the front of my bike. That's what my bike had on it when I bought it. The speedo would read slow. It reads just about perfect now.

          It also had a 120/90/17 on the rear. I use a 130/90/17 now.

          Wait a minute. I told myself that I would not get involved in any more tire threads. Now look at me.







          Thank you for your indulgence,

          BassCliff

          Comment


            #6
            Originally posted by BassCliff View Post
            Hmmm, this is getting curious-er and curious-er.

            I always thought the "stock" size was a 100/90/19 for the front of my bike. That's what my bike had on it when I bought it. The speedo would read slow. It reads just about perfect now.
            I'll just bet that your bike had one of those dreaded "previous owners", huh?

            You know you can't trust much of what they said and/or did.

            When you say your "speedo would read slow", I read that as "when I was doing an actual 60 mph, my speedo would read 56 (or so)". Usually it's the other way around, the speedo would read faster than actual speed. By installing a larger tire, there are fewer revolutions per mile, which slows it down to rather accurate.

            What are you using for your speed reference? You know that you can't trust the cages around you to be traveling at the speed limit, don't you? Your best bet is to use a GPS. Mount it to the bike by whatever means might be convenient, go for a ride. Hold any speed you wish, check your speed on the GPS. Try several speeds, the error is not always linear.

            The bottom line is, ... if it's accurate, that's what counts. On all three of the 850s that have spent time in my stable, a 100 front tire has had the speedo error down to about 1 mph or so at 70. Speedo reading 70, GPS would show about 68.8. Close enough for me.

            .
            sigpic
            mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
            hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
            #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
            #2 son: 1980 GS1000G
            Family Portrait
            Siblings and Spouses
            Mom's first ride
            Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
            (Click on my username in the upper-left corner for e-mail info.)

            Comment


              #7
              Speedo on My skunk reads over by quite a bit. 5-10mph at Freeway speeds. My 1000G speedo was much more accurate.

              Using a roadrider. 100 I think, the normal one that everyone gets in any case

              Dan
              1980 GS1000G - Sold
              1978 GS1000E - Finished!
              1980 GS550E - Fixed & given to a friend
              1983 GS750ES Special - Sold
              2009 KLR 650 - Sold - gone to TX!
              1982 GS1100G - Rebuilt and finished. - Sold
              2009 TE610 - Dual Sporting around dreaming of Dakar.....

              www.parasiticsanalytics.com

              TWINPOT BRAKE UPGRADE LINKY: http://www.thegsresources.com/_forum...e-on-78-Skunk/

              Comment


                #8
                Oops, sorry about my .

                Originally posted by Steve View Post
                I'll just bet that your bike had one of those dreaded "previous owners", huh?

                You know you can't trust much of what they said and/or did.
                True and true.

                When you say your "speedo would read slow", I read that as "when I was doing an actual 60 mph, my speedo would read 56 (or so)". Usually it's the other way around, the speedo would read faster than actual speed. By installing a larger tire, there are fewer revolutions per mile, which slows it down to rather accurate.
                Yes, true again. I was thinking 180 degrees out of phase again.


                What are you using for your speed reference? You know that you can't trust the cages around you to be traveling at the speed limit, don't you?
                I don't have a GPS so I will check it by having someone drive along beside me, usually Mrs. BassCliff. I'm pretty sure she won't run over me.


                Thank you for your indulgence,

                BassCliff

                Comment


                  #9
                  Originally posted by BassCliff View Post
                  I don't have a GPS so I will check it by having someone drive along beside me, ...
                  Just remember that cage speedos are not guaranteed to be accurate any more than the bike speedos.

                  .
                  sigpic
                  mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
                  hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
                  #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
                  #2 son: 1980 GS1000G
                  Family Portrait
                  Siblings and Spouses
                  Mom's first ride
                  Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
                  (Click on my username in the upper-left corner for e-mail info.)

                  Comment


                    #10
                    Originally posted by Steve View Post
                    Just remember that cage speedos are not guaranteed to be accurate any more than the bike speedos.

                    .
                    Understood. But sometimes we have to make do with what we got.




                    Thank you for your indulgence,

                    BassCliff

                    Comment

                    Working...
                    X