Announcement

Collapse
No announcement yet.

Heads Off GS425

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Heads Off GS425

    I've got the head off my GS425. I took it off because I had really low compression and I wanted to check the rings and valves. The rings are all good. Looks like iIt's a valve problem.

    I took the head to the shope to get a valve job, and I plan on handling the clearances myself.

    Is there anything else I should do while I have the motor broken down. I was thinking of doing a cylinder hone.

    Any suggestions are welcome
Working...
X