Announcement

Collapse
No announcement yet.

Some measurements needed

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Some measurements needed

    I'm considering converting my 84 Katana to a tubular handlebar, as it currently has clip ons similar to the 85 700E series. Would like to open up my options; these clip ons are not particularly adjustable (not at all!).

    I was thinking I could use a top triple from an 850G or maybe a 1000 / 1100 but need to know some measurements.

    My fork tubes are 37 mm diameter, so that shouldn't cause any conflict.

    I need to know distance between centers of the fork tubes, and also how far back the stem nut centerline is from the centerline between the two fork legs. We'll call it offset for lack of a better word.

    Also, if anyone can tell me the diameter of the hole the steer tube sits in on the tip triple that would be great.

    Thanks so much for your help!
Working...
X