Announcement

Collapse
No announcement yet.

New bike a 1981 gs450L ,but w/ issues.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    New bike a 1981 gs450L ,but w/ issues.

    hello everybody, i got me a new bike and i really dig. she's a little tiny but way fun. a 1981 gs450L, but has the title says, she has a few issues. lots of white smake at start-up till warm. also a small oil drip at the shifter and she shifts really hard. to the point where i have to stop, use my hand and shift it to neutral, but if i am running down the road she will shift but not easy. only thing i can come up with on the hard shifting is the clutch cable is bad or severally worn. (hard to pull in). i am more worried about the small oil leak. at first it was so bad it soaked both of my feet. funny, but going 90 down the hiway and your feet slip off the pegs makes you rethink wtf is going lol. anyway i put 3 quarts of 20-50w in it and i thought it stopped. but after i warmed her up this morning and took her the block she started to drip again. just a little bit. (at the shifter). anyone know what gasket this might be?

    #2
    Originally posted by smokienutz View Post
    hello everybody, i got me a new bike and i really dig. she's a little tiny but way fun. a 1981 gs450L, but has the title says, she has a few issues. lots of white smake at start-up till warm. also a small oil drip at the shifter and she shifts really hard. to the point where i have to stop, use my hand and shift it to neutral, but if i am running down the road she will shift but not easy. only thing i can come up with on the hard shifting is the clutch cable is bad or severally worn. (hard to pull in). i am more worried about the small oil leak. at first it was so bad it soaked both of my feet. funny, but going 90 down the hiway and your feet slip off the pegs makes you rethink wtf is going lol. anyway i put 3 quarts of 20-50w in it and i thought it stopped. but after i warmed her up this morning and took her the block she started to drip again. just a little bit. (at the shifter). anyone know what gasket this might be?
    Clutch pushrod seal would be my guess.
    Ed

    To measure is to know.

    Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

    Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

    Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

    KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

    Comment


      #3
      Mine is an 80 450L. I'm pretty sure my drip is the shifter shaft seal. It only does it when warm and not much when on the center stand. The seal is $8, got it out there, just haven't put it in yet..... nice day for it...

      I also gripped about mine being hard shifting and not easy to get into neutral. Shifting has gotten better with riding. Give it an oil change and ride it some, see if it improves.

      Comment


        #4
        thanks for answering. i have ridden a few times, but still seems the same, i will change the oil and try that. the PO before me put castrol 10w-40 high milage oil in it. so i have to change it. i also was messing w/ the airbox and the PO stuff it full of shop rags and cardbaord. wierd if you ask me. after i took all that crap out. the bike ran a really hi idle. i adjusted her down and now she sounds aot better. i will seal the airbox correctly (hopefully this week) and put an oem filter in it. i have most of the lower gaskets on order. cables also. i have a slow throttle response. i am hoping just the cable is out.

        Comment

        Working...
        X