.png "Powered by vBulletin")
Anybody on here familiar with Yamaha FJ600, Maxim, Radian valve adjustment procedures? Mostly curious about diameter/interchangeability
of the shims with other makes.
of the shims with other makes.
-
sigpicSome of the totally committed probably should be.
'58 + '63 Vespa 150's' (London, GB/RI, US)
'67 X6 T20 ('67 Long Beach, Ca.- misty-eyed)
'71 Kaw. A1-ugh ('71 SF, CA- worked @ Kaw dlr)
'66 Yam. YL1('72 SF-commuter beater)
'73 Kaw. S2A-2Xugh ('73 SF-still parts slave)
'78 GS 750C ('77 SF-old faithful-killed by son)
'81 KZ 750E ('81 SF-back to Kaw. dlr)
'81 GS 650G ('08 back to NE&ME- (project)
'82 GS '82 (2) GS650GZ, L, Middlebury, G current -
They are a 25mm dia. shim, same as CBX and a few others. The old Yamahas such as XS750/1100 were 29mm same as Kawis.'84 GS750EF (Oct 2015 BOM) '79 GS1000N (June 2007 BOM) My Flickr site http://www.flickr.com/photos/soates50/
-
Thanks!
After I didn't get any fairly quick replies, I 'Bingled' a couple of sites, and got info that was a little unclear, but your response cleared up the confusion, thanks again.sigpicSome of the totally committed probably should be.
'58 + '63 Vespa 150's' (London, GB/RI, US)
'67 X6 T20 ('67 Long Beach, Ca.- misty-eyed)
'71 Kaw. A1-ugh ('71 SF, CA- worked @ Kaw dlr)
'66 Yam. YL1('72 SF-commuter beater)
'73 Kaw. S2A-2Xugh ('73 SF-still parts slave)
'78 GS 750C ('77 SF-old faithful-killed by son)
'81 KZ 750E ('81 SF-back to Kaw. dlr)
'81 GS 650G ('08 back to NE&ME- (project)
'82 GS '82 (2) GS650GZ, L, Middlebury, G currentComment
Comment