I'm in the twin club?.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • tkent02
    Forum LongTimer
    Past Site Supporter
    • Jan 2006
    • 35571
    • Near South Park

    #1

    I'm in the twin club?.

    Picked up a nice tight 1980 450E today, with one slight problem. The engine is taken apart, cases split, everything in boxes.

    He took it apart to fix a false neutral between 5th and 6th, said he looked at the shift forks which were fine and gave up. I was looking at the gears on the countershaft, (or maybe it was the mainshaft) the sliding gear for 6th wobbles on the shaft, you can pull it to the side about 1/4 inch. It's like the bearing where it runs on the shaft is worn out, you can actually twist it on the shaft. I'm thinking this is enough to make the dogs engage funny. The dogs themselves look fine at first glance.

    12,000 miles on it all if that matters.

    Might just find a used engine, that wai I can be riding in a few days, or maybe find a used transmission, i'd rather do that from someone here so the parts are more likely to be good.

    Other than that, it looks ready to ride. Brakes are fine, bearings seem tight, new tires, it's all good.

    Any other ideas? Any transmission experts here?

    And, while I'm in there, what's the hot setup, 850 pistons or something?

    Thanks for any ideas guys!
    http://img.photobucket.com/albums/v5...tatesMap-1.jpg

    Life is too short to ride an L.
  • A-train

    #2
    Don't use 6th.


    Comment

    • Big Rich

      #3
      Congrats Tom! 1980 was the best year for the GS450.....

      As far as hop up goes....... a GS500 engine will drop right in the frame (but the exhaust won't). And GS500 motors / parts are easy to come by.

      Comment

      • tkent02
        Forum LongTimer
        Past Site Supporter
        • Jan 2006
        • 35571
        • Near South Park

        #4
        A custom exhaust is required for the 500 engine?
        http://img.photobucket.com/albums/v5...tatesMap-1.jpg

        Life is too short to ride an L.

        Comment

        • Big Rich

          #5
          Yep. The 500 headers come straight out of the front of the motor, which would hit the 450 down tubes. There was a member here that put a complete 500 engine in his 450 and had a custom exhaust made - there are pictures in the Twin thread. Let me see if I can find that.....

          Comment

          • Big Rich

            #6
            Here ya go:

            Place your 2 cylinder GS engine, drivetrain or clutch related questions in this forum.

            Comment

            • tkent02
              Forum LongTimer
              Past Site Supporter
              • Jan 2006
              • 35571
              • Near South Park

              #7
              Any advantage over just using the 500 pistons and cylinders and the 450 head?

              Or is something incompatible?
              http://img.photobucket.com/albums/v5...tatesMap-1.jpg

              Life is too short to ride an L.

              Comment

              • tkent02
                Forum LongTimer
                Past Site Supporter
                • Jan 2006
                • 35571
                • Near South Park

                #8
                Originally posted by A-train
                Don't use 6th.


                Can't use 6th or any other gear. They sre sitting in a box on the floor.
                http://img.photobucket.com/albums/v5...tatesMap-1.jpg

                Life is too short to ride an L.

                Comment

                • Big Rich

                  #9
                  Hmmm..... Mekanix would have more details than myself. But I know the piston domes have different shapes to begin with. The 500 has larger valve diameters, and the cams have more lift for sure (and most likely more duration).

                  Not saying it can't be done (because it has), but finding a complete motor and welding up some bends would seem easier to me.

                  Comment

                  • tkent02
                    Forum LongTimer
                    Past Site Supporter
                    • Jan 2006
                    • 35571
                    • Near South Park

                    #10
                    I'm thinking I'll just find a 450 engine and slap it together for now, might do it up better at some other time.

                    Is there a source for the Suzuki Service Manual for this bike? All I find on Cliff's site is a link to the Clymer's, which I already have a paper copy of (came with the bike)
                    http://img.photobucket.com/albums/v5...tatesMap-1.jpg

                    Life is too short to ride an L.

                    Comment

                    • Larry D
                      Forum Sage
                      Past Site Supporter
                      • Jul 2008
                      • 4926
                      • Indianapolis,IN

                      #11
                      Pictures or it didn't happen......
                      Larry D
                      1980 GS450S
                      1981 GS450S
                      2003 Heritage Softtail

                      Comment

                      • tkent02
                        Forum LongTimer
                        Past Site Supporter
                        • Jan 2006
                        • 35571
                        • Near South Park

                        #12
                        My beautiful bride was giving me "that look" the other day when I brought home the dead 750. She rode down with me, didn't really say anything, but I know what she was thinking. There's simply not enough space for another motorcycle, and she's right. And yet I keep bringing them home. It's a disease. An addiction. Can't help it sometimes. Got to sell some. Or at least sell some parts, they are getting deep.

                        Right now the 450 is hiding in plain sight, the bike itself is sitting in the spot where the parted out 750 was yesterday, gas tank, seat etc on the shelf in the garage, the boxes of engine parts stacked neatly by the garage door. I picked it up when she wasn't here, got everything stashed away before she got home, it just seemed cleaner that way.

                        Then one day when the engine is in, I pull it out to ride it I can say I bought it a long time ago. Bought it for her even.


                        Maybe I can put up a few partial pictures.
                        http://img.photobucket.com/albums/v5...tatesMap-1.jpg

                        Life is too short to ride an L.

                        Comment

                        • Charlie G
                          Forum Guru
                          Past Site Supporter
                          Super Site Supporter
                          • Feb 2009
                          • 6440
                          • Siskiyou county

                          #13
                          Originally posted by tkent02
                          And, while I'm in there, what's the hot setup, 850 pistons or something?

                          Thanks for any ideas guys!
                          Just buy an 850.

                          cg
                          sigpic
                          83 GS1100g
                          2006 Triumph Sprint ST 1050

                          Ohhhh!........Torque sweet Temptress.........always whispering.... a murmuring Siren

                          Comment

                          • tkent02
                            Forum LongTimer
                            Past Site Supporter
                            • Jan 2006
                            • 35571
                            • Near South Park

                            #14
                            Why would I want another 850? Been there, done that. Wasn't impressed.
                            http://img.photobucket.com/albums/v5...tatesMap-1.jpg

                            Life is too short to ride an L.

                            Comment

                            • BigD_83
                              Forum Sage
                              Past Site Supporter
                              • May 2011
                              • 4872
                              • Vancouver

                              #15
                              Originally posted by tkent02
                              It's a disease. An addiction. Can't help it sometimes. Got to sell some. Or at least sell some parts, they are getting deep.

                              Right now the 450 is hiding in plain sight.

                              I picked it up when she wasn't here, got everything stashed away before she got home, it just seemed cleaner that way.

                              Then one day when the engine is in, I pull it out to ride it I can say I bought it a long time ago. Bought it for her even.

                              Aah...the best relationships are built on a solid ground of addiction and deceit

                              I sense you have a great wife, Tom.
                              '83 GS650G
                              '83 GS550es (didn't like the colours in the 80's, but they've grown on me)

                              Comment

                              Working...