Announcement
Collapse
No announcement yet.
Stainless Fastener Costs
Collapse
X
-
afholderman
Stainless Fastener Costs
I went on boltdepot.com today and assembled a kit to replace all the fastener's in my carbs with stainless socket caps bolts. My total, including shipping, comes out to 25.15. That's including the intake boot bolts and a 100 box of m5x12mm, it is only $3 more than ordering the required 40. I have not ordered yet because I wanted to check with others who have changed out their fasteners to see if this cost reasonable.Tags: None
-
sschering
-
7981GS
Have you talked to these guys?
They say that they will make any kit not listed.
Polished stainless screws, bolts, nuts, and fasteners for vintage and modern motorcycle and atv restorations - HONDA, KAWASAKI, SUZUKI, YAMAHA, DUCATI, BENELLI, MOTO MORINI, MOTO GUZZI, AERMACCHI, BMW, CAN-AM, HUSQVARNA, MAICO and many more
Daniel
Comment
-
afholderman
Originally posted by 7981GS View PostHave you talked to these guys?
They say that they will make any kit not listed.
Polished stainless screws, bolts, nuts, and fasteners for vintage and modern motorcycle and atv restorations - HONDA, KAWASAKI, SUZUKI, YAMAHA, DUCATI, BENELLI, MOTO MORINI, MOTO GUZZI, AERMACCHI, BMW, CAN-AM, HUSQVARNA, MAICO and many more
Daniel
Comment
-
I've used these guys for engine bolts, great quality, great prices. They've got carbs sets as well.
Rob
1983 1100ES, 98' ST1100, 02' DR-Z400E and a few other 'bits and pieces'
Are you on the GSR Google Earth Map yet? http://www.thegsresources.com/_forum...d.php?t=170533
Comment
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35322
- Torrance, CA
Z1 sells stainless engine bolt sets too. Lots of different lengths. Well worth the money in my opinion.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
-
afholderman
I decided to go through stainless cycle on ebay, thanks 7981GS for the suggestion. They charged $54.99 for a GS1000 engine set, all carb bolts including both rails, and the intake boot bolts.
Comment
-
Fantastic upgrade. Look forward to the pics.Rob
1983 1100ES, 98' ST1100, 02' DR-Z400E and a few other 'bits and pieces'
Are you on the GSR Google Earth Map yet? http://www.thegsresources.com/_forum...d.php?t=170533
Comment
Comment