Shindengen SH775 plugs

Thanks everyone. It is a little confusing when the thing is not listed by name.

I am always impressed with how fast answers appear on this site. Thanks!

[Nessism]

Another option is to use crimp on spade terminals. After installing them into the R/R male spades, fill up the extra space in the cavity with low acid, electrical safe RTV. Cheap and secure. Also, no bulky connectors which make routing the wires more difficult. I was a little sloppy with the RTV application on this install, but you get the idea. Oh, and no way the R/R would have fit into the stock location with those plastic harness shells installed.

Not specifically, no. But these are the connectors. I ordered the FH012/010 Connectors with 18" Leads - all pre-built and great quality.

http://easternbeaver.com/Main/Elec__...onnectors.html

It's confusing because Jim doesn't specifically list the SH-775, and when I emailed him to see if the FH012 connectors would work, he said he wasn't sure.

I'm going to drop him a note confirming the FH012 connectors work very nicely for the SH-775

[Steve]

I have tried to find suitable plugs to fit it to my wiring without success. Eastern Beaver does not list one.

Not sure where you looked, but I had no trouble finding them.

Eastern Beaver Connectors.

.

I have a new SH 775 rectifier on order. I have tried to find suitable plugs to fit it to my wiring without success. Eastern Beaver does not list one.

Does anyone have source and or part number?

Not specifically, no. But these are the connectors. I ordered the FH012/010 Connectors with 18" Leads - all pre-built and great quality.

http://easternbeaver.com/Main/Elec__Products/Connectors/R_R_Connectors/r_r_connectors.html

I believe these are the ones, the seller might have other for sale

http://www.ebay.com/itm/FURUKAWA-CONNECTORS-for-SHINDENGEN-FH012-FH011-FH010-/360397335835?pt=Motorcycles_Parts_Accessories&hash=item53e95aed1b&vxp=mtr

Thanks gearhead-can you point me at him? Nothing on ebay I could find just now.

Theres a guy on ebay that sells them

[MAC10]

I have a new SH 775 rectifier on order. I have tried to find suitable plugs to fit it to my wiring without success. Eastern Beaver does not list one.

Does anyone have source and or part number?