Announcement
Collapse
No announcement yet.
some pics of my junk, 81 gs450
Collapse
X
-
Guest repliedare those gunna get enough cool air to not burn up inside that?
-
Guest repliedconnected a switch temporarily instead of a keyed ignition, so its easier to work on for the next few months
Leave a comment:
-
Guest repliedhere is what I got accomplished today, gonna make a battery mount and hopefully finish the wiring this weekend
going to use a hinge and the old piece to keep it closed
lots of useless stuff
Leave a comment:
-
Guest repliedOriginally posted by sark View PostNewb question: Where is the cdi/rectifier/electronic bits on that red one? I love it by the way. I have the same bike, but I went in a diff direction with it.
its cool, I'm a newb too, check my join date. I mounted it vertical behind the battery, you can see it in the 4th pic, where I'm sitting on it
Leave a comment:
-
Guest repliedOriginally posted by Richharr View Postnot bad, I'm looking for something with a tube tunnel, since I now have a single backbone
BTW, I know its a big world, but I have an old friend that trains SAR in San Diego b y the name of John Molloy. He's got about 18 years in by now. Just wonder if you ever crossed paths.Last edited by Guest; 08-08-2008, 09:09 AM.
Leave a comment:
-
Guest repliedNewb question: Where is the cdi/rectifier/electronic bits on that red one? I love it by the way. I have the same bike, but I went in a diff direction with it.
Leave a comment:
-
Guest repliedBad ass idea, i like it.
Leave a comment:
-
Guest replieddrilled some holes and made the frame tabs
I still have to cap the right side and make the edges around the battery, although I'm thinking of mounting all of the electronics in it with a hinged top and mounting the battery low behind the engine since its so heavy. I'll figure it out on the weekend I guess
Leave a comment:
-
Guest repliedOriginally posted by jmchambers83 View PostSounds like fun! I'm dying to go somewhere, stuck on I&I duty right now so I can't deploy for another 2 years.
here is what I did today, since I got out of work at 3
since I'm a firefighter, I thought it would be appropriate
welded some tabs on (old bed frame)
Leave a comment:
-
Guest repliedSounds like fun! I'm dying to go somewhere, stuck on I&I duty right now so I can't deploy for another 2 years.
Leave a comment:
-
Guest repliedjmchambers83, this should help you decide to chop it up
turn the volume up and put it on full screen
Leave a comment:
-
Guest repliedOriginally posted by jmchambers83 View PostRich,
I like what your doing with the hardtail, I've really been thinking about doing something along those lines with my gs750 this winter. I noticed you had vet plates along with the "Dick" plate. What service you in? I'm up here in MA with the USMC.
marine corps also, Were everywhere like roaches. I came off active duty on june 28th, I was on a south pac float with special purpose MAGTF 24 in peru. now back in the reserves
Leave a comment:
-
Guest repliedRich,
I like what your doing with the hardtail, I've really been thinking about doing something along those lines with my gs750 this winter. I noticed you had vet plates along with the "Dick" plate. What service you in? I'm up here in MA with the USMC.
Leave a comment:
-
Guest repliedOriginally posted by Erich Z View PostDoes the back of your license plate say "D I C K"? That's crazy.
yeah, its an old bicycle plate someone gave me because my name is richard.
Leave a comment:
-
Guest repliedDoes the back of your license plate say "D I C K"? That's crazy.
Leave a comment:
Leave a comment: