Search:

Type: Posts; User: Brendan W; Keyword(s):

Page 1 of 20 1 2 3 4

Search: Search took 0.45 seconds.

  1. Replies
    2
    Views
    21

    Is this any help?...

    Is this any help?
    ttps://www.cmsnl.com/suzuki-gs1000g-1981-x-usa-e03_model34160/partslist/BLCK0045.html
  2. Replies
    5
    Views
    123

    Yamaha started it with a mistranslation of...

    Yamaha started it with a mistranslation of tuning....:)
  3. Replies
    29
    Views
    462

    Might be worth looking closely at the solder...

    Might be worth looking closely at the solder joint. Check voltage either side. I would almost always us a crimp in preference. If the wires are not supported you have the possibility that they crack...
  4. Replies
    29
    Views
    462

    Looks like you are losing a volt at the ign...

    Looks like you are losing a volt at the ign switch and another at the kill switch.
    I would be aiming for no more than one volt below battery at the coils.
    The internal contacts of both switches are...
  5. Replies
    2,356
    Views
    82,792

    Different days Garth. Trust was in greater...

    Different days Garth. Trust was in greater supply. Family doctors didn't charge their poorer patients. Presidents were more presidential.
  6. Replies
    8
    Views
    217

    Don't beat yourself up about it. It's a bridge...

    Don't beat yourself up about it. It's a bridge everyone has to cross. No exceptions :)
  7. Replies
    11
    Views
    200

    At a wild guess they are trying to shift the...

    At a wild guess they are trying to shift the buzzy driveline harmonics away from places the bike would operate in ?
  8. Replies
    22
    Views
    495

    I saw this here a few years back. The owner looks...

    I saw this here a few years back. The owner looks to have drilled the disks to improve braking ??
    Sorry but the pic stays upside down no matter what I do :)

    63352
  9. Replies
    2,356
    Views
    82,792

    I recall the polio sugar cubes in the early...

    I recall the polio sugar cubes in the early sixties. It all happened in school. I was about seven.
    Don't remember anybody fussing over it. It was one of those things you did, no questions.
  10. Mine is like that. It was a replacement I took...

    Mine is like that. It was a replacement I took from an 850L in a breakers shed.
    The tail was longer than needed and I had to take the slack under the tank.
    The signal Hi/Lo button was different on...
  11. Replies
    28
    Views
    867

    I think it has to do with the mechanics of speech...

    I think it has to do with the mechanics of speech production.
    Try saying a embassy and you will notice that the airflow has to stop, the mouth/tongue gets reshaped and then the air starts flowing...
  12. Replies
    28
    Views
    458

    I have a sahara 350. It sits out in the summer...

    I have a sahara 350. It sits out in the summer rain and never has runoff from the sand grease trap.
    I don't cover it.
    Design defect?
  13. Replies
    29
    Views
    462

    I would open it up and clean it anyway. Most...

    I would open it up and clean it anyway. Most likely there is a lot of dirt in there.
    My meter is not top of the range and I am suspicious of it's resistance measurements.
    I would be more confident...
  14. At this rate they'll be paying us to use the...

    At this rate they'll be paying us to use the service.
    Payback for what they used charge back in the 90s :)
  15. Replies
    12
    Views
    225

    I saw it fine. Just had to say no and reject all...

    I saw it fine. Just had to say no and reject all and so forth. Looks really cool.
    Maybe it's a time zone day night thing?
  16. Replies
    29
    Views
    462

    I had almost the same voltages at the coil. I...

    I had almost the same voltages at the coil.
    I cleaned the fusebox, the ignition switch, the kill switch and the sneaky one was the coil supply plugs.
    That got me back to about half a volt below...
  17. What about fan belts?

    What about fan belts?
  18. Replies
    11
    Views
    192

    Gaia is probably thinking... Humans, my greatest...

    Gaia is probably thinking... Humans, my greatest mistake. Four less on the planet is a good start even if only for a short while :)
  19. Replies
    45
    Views
    2,064

    Reminds me of a conversation with a dealer when I...

    Reminds me of a conversation with a dealer when I bought a new Citroen BX in 1990.
    Why is there no tool kit ?
    They are so reliable you won't need it and so complicated it wouldn't be of any use...
  20. Replies
    4
    Views
    204

    Yep, there should be a three digit code on the...

    Yep, there should be a three digit code on the gas cap, ignition and seat lock.
    In my case the ignition was replaced and has a different key.
  21. That's a valid enough argument as long as the...

    That's a valid enough argument as long as the connections are good. Even if they aren't perfect how much difference can it make?
    For me the returns were above the airbox and out of sight with all...
  22. Replies
    22
    Views
    548

    I have a Yamaha NOS shim here somewhere which is...

    I have a Yamaha NOS shim here somewhere which is also 29mm.
  23. Replies
    12
    Views
    415

    I've had a PM or two with the OP. Anti dive is...

    I've had a PM or two with the OP.
    Anti dive is still on there and all original hoses.
    Never had anti dive. Could that be causing pressure lock?
  24. Have you tried marking the chain and rear...

    Have you tried marking the chain and rear sprocket to see if it's chain or wheel position doing it?
  25. To my way of thinking, the R/R is grounded...

    To my way of thinking, the R/R is grounded correctly when it is connected directly to the returning current flows. If the lights etc are grounded to the frame and the R/R to the frame you have the...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4