21 results in 0.0061 seconds.
-
Fuel Sender to Fuel Plug
Went in to check/repair bad fuel sending unit, and turns out the float & everything broke off in the tank! So my sending unit is currently just a... -
New Owner - troubleshooting '82 GS650 that won't start
Hey Everybody - thanks in advance for any advice and help. I'm completely new to bikes and engines in general, so I'm learning as I go.
I... -
82 GS650G Pilot Air Screw
I'm trying to rebuild my Carbs and my pilot air screws are extremely worn out. Z1 and partzilla do not carry the correct pilot screw. -
1983 GS650G Decals
hi guys i have a doubt, i want to respray my bike and now i need to make models of the decals, i been searching the web for decal sets with no luck, the... -
battery drains on start
Hi Guys, new owner of a Gs650G 1983 here, I have a problem with the battery, in the first start the battery drains, so if I didn't manage to start the... -
82 gs650 RPM "wall"
been awhile so I'll start a new thread
,carbs(disassembled, dipped, new rings), replaced intakes, fuses, and lots of other little things. its... -
1982 gs650g will not pull past 6k
so iv read around seen a few things on this fourm just can not get this issue to go away
the bike was a barn bike since 95 it has 3600 mi on it... -
How to make my GS650L Louder!
Hello, just got an '82 gs650L with 15k miles...making it into a bobber and want it to sound loud. If you search YouTube for gs650 bobber and the one with... -
82 GS650 running like a dog - Help
Hey guys, I purchased an 82 GS650 a couple years ago and the thing is in excellent shape! When I bought it, it needed a new battery and the guy said that... -
New Member, GR650 Owner from Brisbane - Australia
Hello all.
I feel I'm very new to motorcycles despite having owned a motorcycle for about 8 years now. First I owned a GS500 and then 'upgraded'...Last edited by Guest; 02-01-2016, 01:30 AM. -
Top Engine Noise and Ping
Hey everyone, I'm in the process of overhauling my GS650G. I've gone through and cleaned, bench, and vacuum synced the carbs as well as adjusted all my... -
Weird engine noise, tapping. 1982 GS650GL
I recently rebuilt the lower end of my 1982 GS650GL.
I had a bad bearing on my crankshaft which wore down to nothing and ripped up the crankshaft... -
GM HEI conversion no spark
Hi everybody!
First post to the site, and I am amazed at the wealth of knowledge on the site. Very thoughtful discussion on all the threads too,... -
650 vs Kat 600 (88-97) header spacing
In my use of the search feature I found at least one other user looking for this info, and since I'm doing the measurements, I thought I'd document it....Last edited by Guest; 01-16-2015, 07:46 AM. -
I suspect I am running lean.
'83 650L, just threw on some K&N's, emgo shortys, and did the Dynojet stage 3 rejet. I also wrapped my exhaust with fiberglass wrap. The bike idles...
