7 results in 0.0072 seconds.
-
Valve adjustment.. where to start?
I decided that on top of rebuilding the carb and properly cleaning it, I will adjust the valves as its no mystery there is backfiring out the intake and... -
carbs cleaned and installed but bike don't want to run
I have a 1982 gs750. Last week I pull and cleaned the carbs. After I installed the carbs the bike doesn't want to run correctly. It will only... -
Chain: loose, tight, loose, tight, etc
Noticed after my last rear tire change the chain would slap a little bit. I said to myself, I gotta tighten that. Tonight I did, and then I had it too... -
1978 gs750 valve adjustment question
I just recently bought a gs750 and am no motorcycle expert other than what I learned from this forum and my manual. However I rebuilt the carbs I think... -
GS550E Camchain Tension - In Situ?
Hi, new to the forum!! I've had my 1979 GS550E for a month now. The previous owner had managed to shear the end of the shaft and nut off the camchain... -
Valve shims on a 82 gs550mz
i checked my valve clearences today on my gs and noticed that not even the smallest feeler guage will fit between the lobes and shims. does this mean... -
Is my rear damping adjustment shot?
It's spring yay! Apart from some spit and shine, I've tweaked the suspension a bit. I thought harder and stiffer made the bike corner better, but setting...
