Hi everyone,
I purchased a 1982 Gs650G 2 weeks ago with 12,000 miles in good running condition and am currently working on making sure everything...
19 results in 0.0070 seconds.
-
Valve clearance, Valve seats, small oil leak, low compression, please help.
-
1980 Gs850L Engine swaps?
So I have a problem, I have a gasket leak. Just a manageable drool on the left side. However I got a full gaskets kit to replace everything. Figured I'd... -
1983 GS450GA Compression Issue
Hi guys,
I picked up a 1983 GS450GA a couple monthis ago off of Craigslist. The previous owner had bought it eight years ago from a guy who had... -
Compression probs
Howdy folks, new to the group and the GS world and looking for some wisdom.
I bought a 1977 GS550 that a guy had done all the hard work:... -
Low Compression and Knocking Noise 1981 GS650G
On my last ride a few miles away from home I started to here a vibration around 3,000 rpm's. I drove it straight home to diagnose the problem. At an...Last edited by Guest; 02-23-2017, 10:16 PM. -
Most likely misplaced questions for a 79 GS550E
First off, hi. I've been a lurker in the forums since late last year.
I've always enjoyed riding but have always taken a passive role with... -
85 gs 700 e low compression (90-100)
so i did the old oil in the spark plug whole and the compression reading's where still at about 100. i was wondering if anyone knows how to check and... -
Loss of power and fuel economy
For the last year or so I have only used my '80 GS 1100L to drive around the city and for short trips. This past weekend I drove ~500 miles though. I... -
What should I get as a compression reading 78 750 EC
I have the manual but it does not tell me what I should be getting as a compression reading and I am curious. I just picked up a GS750 EC 1978 and I feel... -
Compression test plug size?
The compression gauge I use for my '82 1100GL does not fit Tom's '80 1100E because its spark plugs are smaller.
Of course I only discovered... -
Time for a rebuild?
Seems over the last 1000 miles my 1982 GS1100GL bike had been losing some power and finally took the time to figure it out: cylinder #3 has only 75 PSI... -
'83 GS-550ED Crazy Low Compression
Hey all,
Guess my profile got purged a while back, I've been overseas for the Army so haven't had a chance to visit here.
I've... -
'81 550T very low compression on all 4 cylinders
Hey everyone. So I bought an'81 550T in non-running condition about two months ago and have spent many nights and weekends trying to get it running again...Last edited by Guest; 07-14-2012, 08:06 PM. -
GS850GL Valve clearance questions.
Before I forget, this is a link to a very good video about replacing shims which is the tricky part most how-to's don't provide much detail on for the... -
'81 GS850 Won't Start
I know this thread title may wear thin on many members' patience, but I feel like I need some clarification/direction. First a little history:
...
