27 results in 0.0065 seconds.
-
To replace barrel gasket or not to?
Good day fellas, i currently have my bikes head off to replace the headgasket because it had a bit of a leak on the front where that one bolt comes up... -
Top-end reseal on an '80 GS850 question/concern
Hey all. First off, those looking for a tip on base gasket removal.... try aircraft stripper. Gasket remover didn't do much but aircraft stripper made... -
The Great Exhaust Header Conondrum
Dear all,
Nearing the end of my GS850 GN rebuild, and I am trying to fit my old aftermarket exhaust. It a Sebring 4 in 1 with header flanges... -
smoke coming from engine
I just put my bike back together after rebuilding the carbs, adjusted the valves (2 shims), changed the head gasket, and updated to a Dynatek ignition.... -
( Anybody Have One Handy? ) Oil Pan Gasket for GS 550
Looking for a Oil Pan Gasket for a 81 gs 550 this style, Thanks for any help anybody can provide in advance cant tell you how much I Appriciate it. I... -
Which head gasket do I return??
Ladies and Gentlemen....Once again I need your advice......
I'm slowly rebuilding the engine of my GS1100 GL and I bought a NE gasket kit.... -
Crankcase, crud got in, and cleaning base gasket
Good morning all,
In my journey, I have pulled the cylinders from the engine and ran into some issues I am hoping you all can help with.
... -
Sourcing correct gasket
I needed to take the cover off for the stater/starter clutch. In the process the existing gasket for the cover tore.
This is for 1983 GS850GN... -
Stuck Valve Cover, GS450GA
Hi,
Preparing my 1983 to re-registered after taking it off registration for nearly a year. In the process of doing some maintenance (replacing... -
Where can I find 1983 GS450TXZ Gasket Kit?
Looking to do a rebuild this winter of my 1983 GS450TXZ. Have had no luck finding a gasket kit. Any ideas? -
leaking valve cover
I have a 1980 Suzuki GS550E that I have slowly but surely been getting back into running condition. I recently took the valve cover off in order to check... -
How to remove head gasket residue
I removed the head gasket but I'm having a heck of a time removing the residue left behind from the head gasket. Any suggestions? -
My '79 GS 425L project
Winter is here in Portland, which means working on my bike but not riding it for 6 months
I'm hoping to attempt to rebuild the engine to check for...
-
What do you call a print and cut service for making templates?
I'm having a hard time coming up with a descriptor for what I want to accomplish.
Making gaskets is not that hard. Currently in order to... -
Cylinder head gaskets original Vs MLS
I have a 1982 GS750EZ, with about 75k km (~48K miles) on it. I removed the cylinder head to cure a minor oil leak from the outside forward edge of the...
