9 results in 0.0066 seconds.
-
Valve adjustment.. where to start?
I decided that on top of rebuilding the carb and properly cleaning it, I will adjust the valves as its no mystery there is backfiring out the intake and... -
shim size all over the place.....
1982 gs1100 gk.
hadn't run for the first year i owned it while i was going through it.
I checked all the valve clearances and... -
81 GS650G Head tapping when warm
My 650 has a tapping noise in the head from what sounds like cylinder 3, but only when the engine is being restarted from a warm condition and it only... -
GS850GL Valve clearance questions.
Before I forget, this is a link to a very good video about replacing shims which is the tricky part most how-to's don't provide much detail on for the... -
Please verify my shim calculation
I would appreciate if someone would look through these numbers for me. I'm not very experienced.
All valve clearances were tighter than my... -
'81 450 Shim Sizes?
'81 GS 450 T
correct range .03mm-.08mm
Checked my valve clearances.
Exhaust 1 - 2.60x shim -.038 feeler will not fit.
... -
Valve Tappet too Small 1.6-1.8mm?
1978 GS750E @58K miles
Any ideas what would cause my intake Valve #1 to indicate the need for a shim size between 1.6-1.8mm?
I removed... -
No oil in one cam shim bucket - 82 gs850g
I hope someone has heard of this and can help. Bike is an '82 gs850g. Had cam cover off and noticed number 2 intake cam shim bucket is nearly dry, all... -
Valve shim adjustment measurements
Howdy, I'm adjusting / changing the shims on my bike and am noticing something that I didn't notice before. When checking the gap to make it between...
