Hi All,
I found when riding that my bike seemed to loose some power over 4K rpm. I started by checking the timing which I couldn?t properly...
18 results in 0.0071 seconds.
-
1977 GS400X Advance Assembly Replacement
-
Ignition Timing With a Circuit tester
i have a 77 gs550 that I'm trying to set the ignition timing on. I'm using one of those circuit testers where I can hook up a banana clip to the point... -
gs750 Points Plate. is it all there? with photos.
Gday.
im not very good with electrics but im trying to learn. i just picked up this beauty of a 78 gs750e for 250aud$ off a guy whos had it sitting... -
Fooled by GS1100G timing probkem
A couple of years ago, I installed a Dyna S ignition system. It needed a mechanical advance, so I used one out of an 850.
I ran it with the... -
Help!!
I need some help with checking valves, timing and sycning carbs on my 79 gs850 If anyone is located in the south bend, in area i will pay for your help.... -
How do I tell if the cam chain needs replacing?
I am replacing the piston rings on my 78 GS1000. I have the head off and am working on getting the cylinder block off...the rear chain guide is jammed... -
Cam chain timing
First, thank you everyone for all the helpful information on this site! It's been a great resource getting my GS650G back to where she should be! This... -
GS750 Struggles to get to 80 MPH...
Hello folks,
I took my 81 GS750L out for a romp on the back roads today, and normal riding and up to about 60 MPH the runs like a top. But... -
Timing help?
Does anyone know where the timing marks should be located for the intake and exhaust cams corresponding to the head and chain? I have a 1978 gs1000 2... -
need advice on no start
Ok so i have a 1978 gs750 and i always had trouble on cold starts i would sometimes have to catch it in gear but after she was warmed up she was good....ive... -
GS750, Ignition trouble on cylinder 1 and 4
Hey Guys.
I've been fiddling with the Ignition and Carbs on my GS750.
Carbs got:
bigger jets (140)
single pod air filters... -
Points / Timing Issue
Dear GS enthusiasts,
I recently replaced my points and I'm know having a difficulty getting the timing dialed in on my 1978 gs750. This is the... -
help timing please
so i feel like im not timing my motor correctly. what is the position of the cylinders when at tdc? is 1 and 4 supposed to be at the top of the head?... -
jumped timing? please help!!
so here's the deal. i have a 82 gs1100gl, had it about a month now and it's been my daily rider. it's been making a clanging sound and i wasn't sure if... -
'82 GS300L Restore & Timing Adjustment - Complete Noob
Hello All,
I recently purchased an '82 GS300L for a summer commuter back and forth to class, etc. It was in OK condition and ran when...
