22 results in 0.0071 seconds.
-
My 82 GS650GZ Build
I picked this 82 650 a little over a year ago and have spent quite a bit of time fixing and upgrading since then. I actually have a couple photos floating... -
Strange Valve Shim Adjustment
I did a valve adjustment today and it mostly went fine but the exhaust for cylinder 1 is being strange so I wanted to run this by someone else for some... -
Valve shim adjustment
78 GS 750
I am doing the valve adjustment. I found one intake valve is too tight. I have the motion pro 08-0017 tool to depress the bucket... -
Got The bike started just a few more issues now!
Hey Guys,
So When i first got this bike it was no where near running condition with a lot of help for youtube and this site i have been able... -
Valve clearnce issue. Helpp
I'm working on a 1982 Suzuki gs1100l and I'm trying to check the valve clearence to see if they are withen spsc. But no matter where the cam position... -
Valve adjustment gone wrong
I have an '82 GS1100EZ.
While checking up on a weeping valve-cover gasket I discovered two of my valve adjuster bolts and nuts are missing.... -
Stuck Valve Cover, GS450GA
Hi,
Preparing my 1983 to re-registered after taking it off registration for nearly a year. In the process of doing some maintenance (replacing... -
1979 gs750L panic! Can't single out the problem.
Hey! I'm new to the forums, my name is Dave.
I recently traded a beat-up but well running 2007 ninja 250 for my first vintage jap bike.... -
Valve clearance and one too large
Greetings all, been awhile.
Checking my shims and noticed a couple things:
1st, There's a difference clearance measurement... -
Carb sync just for idle?
So this week I thought "what if and what would it cost" if I let a "respected" shop do the carb tune and valve adjust on Tom's 801100E... -
Replacing cam chain without motor tear down?
I started a thread previously about my bike just continuously cranking without starting and now i know why. BOTH exhaust valve adjusters came loose on... -
GS850GL Valve clearance questions.
Before I forget, this is a link to a very good video about replacing shims which is the tricky part most how-to's don't provide much detail on for the... -
1st time valve adjust tips 81 650GL
Hey guys so now that im felling much more comfortable with working on this bike after reading tons of info on this site, I think its time for valve adjustment,... -
Please verify my shim calculation
I would appreciate if someone would look through these numbers for me. I'm not very experienced.
All valve clearances were tighter than my... -
Is there a guide to changing the head gasket?
During this winter I want to try adjust the valves on my 8-valve gs750 from 79. I will follow Bikecliffs excellent picture guide, so I'm pretty confident...
