18 results in 0.0105 seconds.
-
1979 GS750. Help! Valve Keeper popped out while adjusting valves.
ACTUALLY A 1982 750T
keepers came out. Do i have to remove head to fix? Thanks... -
Valve adjustment.. where to start?
I decided that on top of rebuilding the carb and properly cleaning it, I will adjust the valves as its no mystery there is backfiring out the intake and... -
Orlando Valve Shims
Is there anyone in the Orlando, FL area that has any valve shims that I could trade with? I need 2.40, and 2.45 shims. I have some others that I can... -
timing chain and cam re-installation
Hi,
My son and I are rebuilding a GS 400E, 8 valve.
We reassembled everything as per the manual, and when we went to turn it... -
Valve adjustment gone wrong
I have an '82 GS1100EZ.
While checking up on a weeping valve-cover gasket I discovered two of my valve adjuster bolts and nuts are missing.... -
Advice : Would you reuse these exhaust valves?
Hello All,
I am fairly new to the forum been mostly getting info from previous post. I have been going through my 1980 GS100G engine and... -
85 gs 700 e low compression (90-100)
so i did the old oil in the spark plug whole and the compression reading's where still at about 100. i was wondering if anyone knows how to check and... -
Clattery Tach Drive Gear?
Hi guys,
First post so forgive me if I noob anything up. I've been going step by step through the process of getting a 1977 GS550b roadworthy....Last edited by Guest; 07-29-2014, 08:28 PM. -
Hillbilly Valve Spring Compressor
i found this brass bushing in a scrap pile. put it in a vise and sawzalled off the side for access. along with a big old C clamp it's a bit clumsy but... -
1978 gs750 valve adjustment question
I just recently bought a gs750 and am no motorcycle expert other than what I learned from this forum and my manual. However I rebuilt the carbs I think... -
1st time valve adjust tips 81 650GL
Hey guys so now that im felling much more comfortable with working on this bike after reading tons of info on this site, I think its time for valve adjustment,... -
Valve damage
Im attaching a pic of one of my exhaust valves as Im a little puzzled as to how it got like this. All other valves are in good condition.
... -
Please verify my shim calculation
I would appreciate if someone would look through these numbers for me. I'm not very experienced.
All valve clearances were tighter than my... -
-
valves on 1983 gs450
is there any way to see if the valves are ok when the cylinder head is off with out taking the valves out?
