Announcement

Collapse
No announcement yet.

Vinyl seat repair

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Vinyl seat repair

    Hi everyone,

    I've got the stock seat for my '78 GS750 and it's generally been in VERY good condition but I noticed a very slight tear forming in it. The rainy season is coming up so I want to get it fixed sooner than later.

    I'm guessing that patching the seat is probably the way to go here. Any recommendations for how to patch a seat? Or other ideas? I searched for posts on this but couldn't seem to find anything.

    Thanks,
    Isaac

    #2
    Some info here....


    Welcome to the GSR, by the way!
    Tony.
    '82 GS1100E



    Originally posted by themess
    Only in your own mind did you refute what I wrote.

    Comment


      #3
      They sell a special glue at kid's skate shops called Shoe Goo. It's a flexible (silicon based?) glue that is black and amazingly strong. Kid's use it to patch their shoes. I've used it for vinyl repair with good results.

      Comment


        #4
        Patches are only temporary

        Comment


          #5
          Hey Howdy Hey!

          Hi Mr. ioates,

          Let it be known that on this day you are cordially and formally welcomed to the GSR Forum as a Junior Member in good standing with all the rights and privileges thereof. Further let it be known that your good standing can be improved with pictures (not you, your bike)!

          Perhaps you've already seen these, but I like to remind all the new members. In addition to the
          carb rebuild series, I recommend visiting the In The Garage section via the GSR Homepage and check out the Stator Papers. There's also a lot of great information in the Old Q&A section. I have some documentation on my little BikeCliff website to help get you familiar with doing routine maintenance tasks (note that it is 850G-specific but many tasks are common to all GS bikes). Other "user contributed" informational sites include those of Mr. bwringer, Mr. tfb and Mr. robertbarr. And if your bike uses shims for valve adjustments, send an email to Mr. Steve requesting a copy of his Excel spreadsheet that helps you keep track of clearances, shim sizes and other service work.

          These are some edited quotes from one of our dear beloved gurus,
          Mr. bwringer, with ideas on basic needs (depending on initial condition), parts, and accessories.

          ***********Quoted from Mr. bwringer************

          Every GS850 [and most other models] has (or had) a set of well-known issues that MUST be addressed before you have a solid baseline for further troubleshooting. It's a vintage bike, and it's quite common (as in, every single GS850 I have had contact with) that there are multiple problems that have crept up and slowly gotten worse over the years. It's not like a newer vehicle, where there's generally one problem at a time.

          These common issues are:

          1. Intake O-rings (install NEW OEM or Viton only - common nitrile O-rings will quickly deteriorate from heat)
          2. Intake Boots (install NEW -- these cannot be repaired)
          3. Valve clearances (more important than most people think)
          4. Carb/airbox boots
          5. Airbox sealing
          6. Air filter sealing
          7. Petcock (install a NEW one)
          8. On '79 models, install new points or Dyna electronic ignition (or at least verify that the old points are working correctly)
          9. On all models, it's fairly common to have problems with the spark plug caps. These are $3 or $4 each, and often worth replacing if you're keeping the stock coils/wires.
          10. Stock exhaust with NO leaks or holes -- good seals at the head and at the junctions underneath.

          Carburetor maintenance:

          Replace the intake boot o-rings, and possibly the intake boots. Here's the procedure:

          Here's an overview of what happens with this particular problem:

          You'll also want to examine the boots between the carbs and the airbox. There's a good chance these are OK, but check them over.
          And finally, if things still aren't exactly right, you'll want to order a set of o-rings for BS carbs from the GS owner's best friend, Robert Barr:
          http://cycleorings.com
          Once you receive these rare rings of delight, then you'll want to thoroughly clean and rebuild your carburetors. Here are step-by-step instructions that make this simple:


          OEM Parts/Online Fiches:

          I would definitely double and triple the recommendations to use Cycle Recycle II and Z1 Enterprises as much as possible. These guys are priceless resources. Z1 tends to have slightly better prices, CRC2 has a wider range of goodies available. If you're near Indy and can bring in an old part to match, CRC2 has a vast inventory of used parts.
          http://denniskirk.com - Put in your bike model and see what they have.
          http://oldbikebarn.com - seems to be slowly regaining a decent reputation, but it's still caveat emptor. They don't have anything you can't get elsewhere at a better price anyway.
          http://www.babbittsonline.com/ - Decent parts prices. Spendy shipping. Don't give you part numbers at all. Useful cross-reference if you obtain a part number elsewhere. Efficient service.
          http://bikebandit.com - Fastest. Middlin' prices. Uses their own parts numbering system to obfuscate price comparisons -- can be very confusing for large orders. Cheapest shipping, so total cost usually isn't too bad.
          http://flatoutmotorcycles.com - Slow. Cheapest parts prices, crazy shipping costs. Don't expect progress updates or much communication. Real Suzuki part numbers.
          http://alpha-sports.com - Exorbitant parts prices. Different type of fiche interface that's quite useful at times, especially with superceded part numbers. Real parts numbers. Shipping cost and speed unknown due to insane, unholy pricing.

          Stainless Bolts, Viton o-rings, metric taps, dies, assorted hard-to-find supplies and materials, etc:

          http://mcmaster.com - Fast, cheap shipping, good prices. No order minimum, but many items like bolts come in packs of 25 or 50. Excellent resource.
          http://motorcycleseatcovers.com - Great quality, perfect fit (on original seat foam), and available for pretty much every bike ever made. Avoid the textured vinyl -- it's perforated.
          http://newenough.com - You DO have riding gear, don't you? Great clearances, always outstanding prices and impeccable service.
          ***************End Quote**********************

          Additional parts/info links:

          GSR Forum member Mr. duaneage has great used upgraded Honda regulator/rectifiers for our bikes. Send him a PM.
          New electrical parts:
          http://stores.ebay.com/RMSTATOR or http://www.rmstator.com/
          Aftermarket Motorsport Electrics parts for motorcycles, dirtbikes, atvs, motosport vehicles manufactured and distributed by Rick's Motorsport Electrics


          For valve cover and breather gaskets, I recommend Real Gaskets (reusable silicon):

          Carolina Cycle
          Discount OEM Motorcycle & ATV Parts. Warehouse Direct. Since 1970.

          Ron Ayers Motorsports
          Honda Suzuki Kawasaki Yamaha OEM motorcycle atv and side by side parts with a full line of aftermarket accessories.

          MR Cycles
          Find OEM motorcycle and ATV parts for Honda, Kawasaki, Suzuki, Yamaha, and Polaris.

          Moto Grid

          Salvage/Used

          Located in Ottawa, Kansas, Oz Powersports has the products for you. Stop by today. Oz Powersports, Ottawa, KS, Motorcycle Salvage, Salvage Parts, Accessories, ATV, Jetski, Motorcycle, Parts, Tank Sports, Redcat Motors, Salvage, GOPRO cameras, GARMIN GPS systems

          If all else fails, try this:

          Used bike buying checklists:

          http://www.clarity.net/~adam/buying-bike.html
          Lots of good info/pictures here:
          Probably the largest Suzuki motorcycle fan site in the world. Online since 2001. Thousands of pages with technical information, pictures, magazine adverts and brochure scans of most Suzuki motorbikes ever sold in different parts of the world. Thousands of bike pictures and stories posted by the readers. ALL Suzuki motorcycle models around the world have their place here!


          http://www.bikepics.com

          Basic motorcycle maintenance/repair:
          http://www.dansmc.com/mc_repaircourse.htm
          Online Clymer manuals:
          http://search.ebscohost.com/ Click on "Small Engine Repair" then "Motorcycles". User=library, password=library. Note: This link may not work if you are on a school campus.


          Thanks for joining us. Keep us informed of your progress. There's lots of good folk with good experience here.



          Thank you for your indulgence,

          BassCliff
          (The unofficial GSR greeter)


          Click here to visit BikeCliff's website.

          Comment


            #6
            Personally, If I were you, I would just replace the seat cover for a new one. I install 3-4 seat covers from JC Whitney in the last 25 years owning my GS1100 and fit is perfect and easy to install. I looked up your year GS for you.

            Here you go!
            Explore JC Whitney for premium auto parts & accessories, dive into car culture, & stay updated with the latest automotive events & tech trends


            Good luck!

            Kichigai

            Comment


              #7
              Also try Sargent for seat covers. They'll even do a full rebuild if you're willing to pony up the $$.

              Comment


                #8
                I fixed a really small tear in my newly recovered seat with of all things super glue. Still working 5 months later. It was a very small and the glue seemed to bascally melt the vinyl back together.

                Comment


                  #9
                  Check out THIS THREAD for some posts I made (including pictures) regarding "Tear Repair." It has links to the manufacturer's site and works extremely well - sounds like the perfect solution for your small tear.

                  Regards,

                  Comment


                    #10
                    Awesome, thank you for all of these suggestions. Now I've got lots of reading to do... :-)

                    Thanks too for the welcome.

                    Comment


                      #11
                      Anyone know where to get one for an 80 550e? JC whitney does not show one. Do any others fit?

                      Comment


                        #12
                        Verde Powersports http://www.verdepowersports.com

                        They sell them on ebay or you can call direct.

                        If the 80 550e is a flat seat and not 2 leveled like the 80 550L seat, they can help you.
                        1980 GS550L

                        Comment

                        Working...
                        X