Page 2 of 4 FirstFirst 1234 LastLast
Results 11 to 20 of 37

Thread: I rebuild carbs

  1. #11
    Join Date
    May 2005
    Location
    Santa Barbara CA
    Posts
    17,716

    Default

    Yes
    PM me the details
    1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
    1985 GS1150ES stock with 85 Red E bodywork.


  2. #12
    Join Date
    Aug 2014
    Location
    Charlotte, NC
    Posts
    47

    Default

    Looking at getting a set of carbs cleaned and rebuilt. Tried to PM you but your box is full. Carbs are from a 77 gs550 (VM22ss) You can PM me or reach me via email at Dphillips030@gmail.com. Thanks

  3. #13
    Join Date
    May 2005
    Location
    Santa Barbara CA
    Posts
    17,716

    Default

    I now have an Ultrasonic cleaner.
    1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
    1985 GS1150ES stock with 85 Red E bodywork.


  4. #14
    Join Date
    May 2005
    Location
    Santa Barbara CA
    Posts
    17,716

    Default

    I'm still going if anyone needs this service.
    1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
    1985 GS1150ES stock with 85 Red E bodywork.


  5. #15
    lizardslaps Guest

    Default

    Just got my carbs back thank you very much they run fantastic you rebuilt them and replaced damaged carbs for a much much better price than the local shops around here.

    thank you again I will recommend friends to you

  6. #16
    82 750T Guest

    Default

    Just put the carbs Bill rebuilt on my 82 GS750T. The bike is at my sister's home in upstste New York. I only use the bike to take a few rides when I visit a couple times a year. The bike runs so well I'm not even going to break out the sync guages I purchased. I just want to enjoy the bike for the next ten days. He was fast and did incredible work. Communication was excellent throughout the process. I highly reccomend Bill's services to maintain your carbs or sort out those "pod and pipe demons". In a word: incredible. But economical too. Thanks again Bill

  7. #17
    alaska81GS1100E Guest

    Default

    I'd like some info, pricing for rebuild and Stage 3 rejetting for BS34 CM's on a 81 GS1100E. I already have the jetting kit.
    I also have some RS36D3-K's that might need a rebuild and cleaning.
    PM please.

  8. #18
    stingeymail Guest

    Default

    Looking for same service. Sounds great for those of us that are less mechanically inclined.

    Chef1366 - Are you still doing this work?

  9. #19
    Join Date
    Oct 2015
    Location
    middle of maine
    Posts
    22

    Default

    thanks bill!!! carbs look great and engine is beastly now! anyone looking for first rate,quality job ,chef's work is top notch!!

  10. #20
    Burque73's Avatar
    Burque73 is offline Forum Sage Past Site Supporter
    Super Site Supporter
    Join Date
    Mar 2016
    Location
    Albuquerque, NM
    Posts
    4,084

    Default

    Bill did my carbs as well. Came back well packed and padded, safe and sound. Since they came from an 81 the choke had to be swapped out for the 83 GS850 I recently purchased (Bill offered to do this as well). Installed on the bike and it fired right up. Slight idle adjust was all they needed. He sent a detailed list of repaired/ replaced parts as well.

    Thanks again Bill,
    Roger
    Roger

    1983 GS 850G
    2003 FJR 1300A



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •