.png "Powered by vBulletin")
Anybody ever use this? I'm recovering my seat and the pan is decent but does have significant rust in a couple of areas. I cleaned, sanded, filed, etc to get as much loose stuff off as I could and sprayed several coats of this on the bad areas. I guess time will tell. Seems like a lazy man's approach. Jim M
-
Anybody ever use this? I'm recovering my seat and the pan is decent but does have significant rust in a couple of areas. I cleaned, sanded, filed, etc to get as much loose stuff off as I could and sprayed several coats of this on the bad areas. I guess time will tell. Seems like a lazy man's approach. Jim M1983 GS 1100 Guided Laser
1983 GS 1100 G
2000 Suzuki Intruder 1500, "Piggy Sue"
2000 GSF 1200 Bandit (totaled in deer strike)
1986 Suzuki Cavalcade GV 1400 LX (SOLD)
I find working on my motorcycle mildly therapeutic when I'm not cursing. -
Looks about the same as the stuff I used, at about the same point in the process as you though. I cut the bad stuff right off, used a wire wheel on the drill, then hit what was left with a spray like that.
Going to clean up the edges and glue the rubber trim back on and put on the new foam / seat.
Good luck with yours, all you can do is give it a fighting chance.
Comment