.png "Powered by vBulletin")
Attached is a picture of 2 screw holes. Is anyone aware as to what size they are? I built Highway bars to attach here and have no idea what size screw this is.
-
-
I guess its trial and error. Must of been a good question! -
If you don't have a caliper, a metric tape measure will do. A SWAG from the small photo would be 12mm. But measurement is knowledge.Comment
-
Take one out and take it to the hardware and use the thread finder and then get a longer one so the brackets will mount up. I am thinking 10MM threads with a 1.25 pitch.MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550
NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.
I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.Comment
-
use an old bolt to see what fits.... hardly rocket science m8
Comment
-
Yeah I can come down to an 8MM...thats what most rockets are held together with..LMAO.MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550
NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.
I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.Comment
-
There is no screw in it to take out. I tried just about every one I could find in my shop to find a match. Just thought Id ask in case anyone had used them before.Comment
-
6mm X 1.0 pitch (IIRC)
EricComment
-
Got it figured out and installed. M7 - 1.0 PitchComment
Comment