Announcement

Collapse
No announcement yet.

Engine number

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Engine number

    Hi guys

    Can anyone help me out understand what engine is sitting on my bike? I have been now searching for hours without finding a answer. My bike is a Suzuki gs 450 from 1985. The confussions happens when I ordrer pistionrings for my bike, they always appears bigger then my originals. Never the right size. I then looked at my engine today and discovered that is says GS40X-105259? can anyone make something out of that number? It would be a lot easier to buy spareparts for the right engine, if the now sitting engine is been replaced by previous owner.

    Kindest
    Attached Files

    #2
    Pretty sure that's a GS400 engine
    Last edited by bwringer; 06-21-2018, 06:33 PM. Reason: Removed incorrect info that applies only to 4-valve GS400
    1983 GS850G, Cosmos Blue.
    2005 KLR685, Aztec Pink - Turd II.3, the ReReReTurdening
    2015 Yamaha FJ-09, Magma Red Power Corrupts...
    Eat more venison.

    Please provide details. The GSR Hive Mind is nearly omniscient, but not yet clairvoyant.

    Celeriter equita, converteque saepe.

    SUPPORT THIS SITE! DONATE TODAY!

    Get "The Riding Obsession" sport-touring motorcycling podcast at https://tro.bike/podcast/ or wherever you listen to podcasts!

    Comment


      #3
      One clue to your engine size will be on the front, near the base of #1 cylinder.
      You will see numbers there that indicate the displacement.

      .
      sigpic
      mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
      hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
      #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
      #2 son: 1980 GS1000G
      Family Portrait
      Siblings and Spouses
      Mom's first ride
      Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
      (Click on my username in the upper-left corner for e-mail info.)

      Comment


        #4
        Yours is probably the European/Canadian model with the 4 valve per cylinder configuration. The easy way to tell is whether the caps on the end of the valve cover are rectangular or round. Round indicates the 2 valve per.cylinder model and the rectangle are the 4 valve per cylinder model. Your engine if I remember correctly should be a 4 valve.per cylinder 400cc motor. I don't think the 450 ever had the 4 valve per cylinder head.
        '84 GS750EF (Oct 2015 BOM) '79 GS1000N (June 2007 BOM) My Flickr site http://www.flickr.com/photos/soates50/

        Comment


          #5
          Hi Guys

          Thanks for the info. Regarding cylinder configuration, my cabs are two round. Hi Steve, thanks - I will check later today to locate the nummer.

          bwringer - many thanks for the information. I will try to located the number Steve is referring to and hope to figure out the size of the engine. If its a dead-end, I will then try to order new pistions for a gs400

          Comment


            #6
            35687084_10155988222629145_1355638759772651520_n.jpgHI Guys

            I have now tried to locate a engine number as Steve, but there is no number unfortunately. I did find other numbers, but not sure what to make out of them?

            Comment


              #7
              Here is a pic of the cylinder head 35836888_10155988222554145_2625060255851085824_n.jpg

              Comment


                #8
                Another pic 35552171_10155988222689145_7778002073009782784_n.jpg

                Comment


                  #9
                  Since you have the cylinder head removed. measure the bore. A GS400 has a bore of 65 mm. You have 4 valves per cylinder,, so it has to be a 400.

                  (the above was edited to eliminate any confusion)
                  Last edited by earlfor; 06-20-2018, 03:25 PM.
                  All the robots copy robots.

                  Komorebi-The light filtering through the trees.

                  You are free to choose, but you are not free from the consequences of your choices.

                  Comment


                    #10
                    Am I seeing something different? I see 4 valves per cylinder, and a stamp on the barrels saying 399 cm3. Looks like a GSX400 engine to me.
                    1980 GS550ET

                    Comment


                      #11
                      Originally posted by steveb922 View Post
                      Am I seeing something different? I see 4 valves per cylinder, and a stamp on the barrels saying 399 cm3. Looks like a GSX400 engine to me.
                      OK then. He said when asked if he had round or square carb caps, his carbs were round. Confusingly he shows a pic of a 4 valve head which would have rectangular cam end caps. I will guess he didn't understand that and posted his were round meaning his carb bodies were round. If the head on the bike is 4 valve per cylinder, then it is 400 and the rings he needs are 65mm.
                      All the robots copy robots.

                      Komorebi-The light filtering through the trees.

                      You are free to choose, but you are not free from the consequences of your choices.

                      Comment


                        #12
                        Originally posted by earlfor View Post
                        OK then. He said when asked if he had round or square carb caps, his carbs were round. Confusingly he shows a pic of a 4 valve head which would have rectangular cam end caps. I will guess he didn't understand that and posted his were round meaning his carb bodies were round. If the head on the bike is 4 valve per cylinder, then it is 400 and the rings he needs are 65mm.
                        Fair point.

                        Mundtsar - it did look like you said you had round cam end caps. Just for absolute clarity, could you post a picture of the cylinder head from the side, ideally with one of the chrome caps attached?
                        1980 GS550ET

                        Comment


                          #13
                          Hi Guys

                          Thank you so much for the feedback. Here is a picture of the carburetor 35652141_10155988222564145_5823810292840136704_n.jpg

                          Comment


                            #14
                            I know is a bad picture, but can you make anything out of it Steve? 35805547_10155989328389145_380730270761877504_n.jpg

                            Comment


                              #15
                              Hi earlfor

                              Hmm, it could be? I did measure the position(only the pistion, without the rings), and it says 68mm - I used a measuring tape, so I guess its not 100% exact. Should I take in to considerations that the top and bottom pistion rings are wider than the actual pistion, when I measure ?

                              Kindest35645283_10155988222619145_4579977786709508096_n.jpg

                              Comment

                              Working...
                              X