Announcement

Collapse
No announcement yet.

Clutch hub nut

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Clutch hub nut

    What size is the hub nut? I thought i had a socket somewhere that fit but cant find it. Been so long since i have needed one i dont remember the size. Memory is saying 30MM maybe???
    MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
    1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550

    NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.


    I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.

    #2
    I can't recall either.
    It's on an M24 thread?
    30 seems light, 32?
    97 R1100R
    Previous
    80 GS850G, 79 Z400B, 85 R100RT, 80 Z650D, 76 CB200

    Comment


      #3
      If it's a 24 mm thread the average size of socket would be 36 mm unless it is a suzuki special 19mm
      There is a list that you can look at https://www.enerpac.com/en-us/traini...and-bolt-sizes
      Last edited by fastbysuzuki; 10-13-2019, 11:20 AM.
      The big guy up there rides a Suzuki (this I know)
      1981 gs850gx

      1999 RF900
      past bikes. RF900
      TL1000s
      Hayabusa
      gsx 750f x2
      197cc Francis Barnett
      various British nails

      Comment


        #4
        Fancy putting a scale on this?
        97 R1100R
        Previous
        80 GS850G, 79 Z400B, 85 R100RT, 80 Z650D, 76 CB200

        Comment


          #5
          1 1/4” works just fine.

          Comment


            #6
            Depends which nut you have... some are bigger. The 1150 one (which is supposedly a harder material) is 32mm I think. The others are 36mm from memory.
            1980 GS1000G - Sold
            1978 GS1000E - Finished!
            1980 GS550E - Fixed & given to a friend
            1983 GS750ES Special - Sold
            2009 KLR 650 - Sold - gone to TX!
            1982 GS1100G - Rebuilt and finished. - Sold
            2009 TE610 - Dual Sporting around dreaming of Dakar.....

            www.parasiticsanalytics.com

            TWINPOT BRAKE UPGRADE LINKY: http://www.thegsresources.com/_forum...e-on-78-Skunk/

            Comment


              #7
              GS 1000 hub nut is the one in question
              MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
              1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550

              NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.


              I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.

              Comment


                #8
                They are all compatible... As far as I know only the 1150 one is different & smaller (but also fits)
                1980 GS1000G - Sold
                1978 GS1000E - Finished!
                1980 GS550E - Fixed & given to a friend
                1983 GS750ES Special - Sold
                2009 KLR 650 - Sold - gone to TX!
                1982 GS1100G - Rebuilt and finished. - Sold
                2009 TE610 - Dual Sporting around dreaming of Dakar.....

                www.parasiticsanalytics.com

                TWINPOT BRAKE UPGRADE LINKY: http://www.thegsresources.com/_forum...e-on-78-Skunk/

                Comment


                  #9
                  I would contact APE and see if they have a hardened nut to reinstall,or have dimensions,Might as well upgrade if poss.
                  sigpic 82 gs1100ez 1168 Wiseco,Web .348 Cams,Falicon Sprockets,Star Racing Ported Head,1mm o/s Stainless Valves,APE Springs,Bronze Guides,etc.APE Billet Tensioner,36CV Carbs,Stage 3 Dynojet,Plenum w/K&N filter,Trued,Welded,Balanced,Crank w/Katana rods & Billet left end, FBG backcut trans, VHR HD Clutch basket,APE nut,VHR High volume oil pump gears,1150 Oil cooler,V&H Megaphone header w/Competition baffle,Dyna S,Coils,Wires,etc.Other misc.mods.

                  Comment


                    #10
                    Yep Ape sell a hardened one... as per my post above the 1150 one is also supposed to be a hardened upgrade over the rest.
                    1980 GS1000G - Sold
                    1978 GS1000E - Finished!
                    1980 GS550E - Fixed & given to a friend
                    1983 GS750ES Special - Sold
                    2009 KLR 650 - Sold - gone to TX!
                    1982 GS1100G - Rebuilt and finished. - Sold
                    2009 TE610 - Dual Sporting around dreaming of Dakar.....

                    www.parasiticsanalytics.com

                    TWINPOT BRAKE UPGRADE LINKY: http://www.thegsresources.com/_forum...e-on-78-Skunk/

                    Comment

                    Working...
                    X