Announcement

Collapse
No announcement yet.

First-time drag racer

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    First-time drag racer

    Thanks to some forum members (thanks in particular Greg B!) finally got my hands on a GS-powered drag bike.

    I'm a long-time motorcycle road and MX racer (the story of my GS1000-powered road racer is here), with a few endurance, flat-track, and cross-country races thrown in for good measure. I've never drag-raced, though, but am looking forward to it.

    I'm sure I'll have lots of questions; any advice/thoughts/recommendations appreciated!

    Patrick

    #2
    Welcome. A few racers here will be particularly good resources for you (stetracer among others).
    "Thought he, it is a wicked world in all meridians; I'll die a pagan."
    ~Herman Melville

    2016 1200 Superlow
    1982 CB900f

    Comment


      #3
      I am fairly certain photos are required....(and one of us might know the bike)
      Bob T. ~~ Play the GSR weekly photo game: Pic of Week Game
      '83 GS1100E ~ '24 Triumph Speed 400 ~ '01 TRIUMPH TT600 ~ '67 HONDA CUB

      Comment


        #4
        Welcome back Patrick.
        I remember that GS1000 thread. It was great going through it again except for the ending.
        2@ \'78 GS1000

        Comment


          #5
          Hot looking road race bike....hope it worked out well.

          The only drag racing I do is to turn 1.....as you’re well used to.
          1979 GS850G
          2004 SV650N track bike
          2005 TT-R125 pit bike
          LRRS #246 / Northeast Cycles / Woodcraft / Armour Bodies / Hindle Exhaust / Central Mass Powersport

          http://s327.photobucket.com/albums/k443/tas850g/

          Comment


            #6
            Get a good light and you're on your way. You learn to hate hundredths of a second.
            2002 bmw r1150gs 1978 gs1000E skunk les pew 1979 gs1000L dragbike
            82 gs1100L probably the next project
            1980 gs1000G the ugly 1978 gs750E need any parts?
            https://m.youtube.com/watch?v=m_m2oYJkx1A
            1978 gs1000E skunk #2 RLAP

            Comment


              #7
              Is it a Bar Bike or No Bar ?
              1166cc 1/8 ET 6.09@111.88
              1166cc on NOS, 1/8 ET 5.70@122.85
              1395cc 1/8 ET 6.0051@114.39
              1395cc on NOS, 1/8 ET 5.71@113.98 "With a broken wrist pin too"
              01 Sporty 1/8 ET 7.70@92.28, 1/4 ET 12.03@111.82

              Comment


                #8
                The bike's got wheelie bars, yes. Here's a photo from earlier today: http://brokenbonepatch.com/picts/non...H_oct_2020.jpg

                Last edited by patrino; 10-19-2020, 10:51 AM.

                Comment


                  #9
                  The good folks at Vicious Cycle set up with a 5.5" by 17" rear wheel over the weekend. The wheel has the same 20mm axle diameter of the stock wheel, which should make it easier to reuse parts like the axle-adjustment sliders, etc. (Wheel's off a 1st-gen Honda CBR00RR, I understand.)

                  Any special trick to fitting a 26" by 7" x 17" drag slick? I've been changing my own tires for about 20 years now (both tubed and tubeless, radial and bias-ply) but have never done a "square" drag tire. My shop has a dependable tire machine, and I've got access to a Rabaconda if necessary (plus my old trusty tire levers).

                  Comment


                    #10
                    Have you made any passes yet? If so post up the slip so we pick on you. Jk.
                    what carbs are on that bike?
                    My stable
                    84 GSX1100EFG-10.62 @ 125 mph 64'' W/B.
                    85 GS1150-9.72@146mph stock W/B.
                    88 GSXR1100-dragbike 9.18@139.92mph/5.68@118mph.
                    98 Bandit 1200-9.38@146mph/6.02@121mph.
                    90 Suzuki GS 1425cc FBG Pro Stock chassis 5.42@124mph
                    06 GSXR750 10.44@135mph
                    00 Honda elite 80 pit bike

                    Comment


                      #11
                      Originally posted by patrino View Post
                      The good folks at Vicious Cycle set up with a 5.5" by 17" rear wheel over the weekend. The wheel has the same 20mm axle diameter of the stock wheel, which should make it easier to reuse parts like the axle-adjustment sliders, etc. (Wheel's off a 1st-gen Honda CBR00RR, I understand.)

                      Any special trick to fitting a 26" by 7" x 17" drag slick? I've been changing my own tires for about 20 years now (both tubed and tubeless, radial and bias-ply) but have never done a "square" drag tire. My shop has a dependable tire machine, and I've got access to a Rabaconda if necessary (plus my old trusty tire levers).
                      If you've done regular tires, slicks are easy. They are much more flexible than a street tire....
                      Bob T. ~~ Play the GSR weekly photo game: Pic of Week Game
                      '83 GS1100E ~ '24 Triumph Speed 400 ~ '01 TRIUMPH TT600 ~ '67 HONDA CUB

                      Comment


                        #12
                        Good news about the tire, I'll update with progress.

                        Carbs look to be stockers, BS36mm Mikuni CV-style with different jets, and individual K&N pods. @stetracer, any recommendations or good rules of thumb for carbs?
                        Last edited by patrino; 10-21-2020, 11:06 PM. Reason: added relevant question

                        Comment


                          #13
                          With your set up you should be in the mid to low 10 second range. Do you have a Air Shifter? If not, you should look into getting one. Slick, Wheelie Bar, Air Shifter. The receipe for consistent ET's Good luck and keep us posted.👍
                          My Motorcycles:
                          22 Kawasaki Z900 RS (Candy Tone Blue)
                          22 BMW K1600GT (Probably been to a town near you)
                          82 1100e Drag Bike (needs race engine)
                          81 1100e Street Bike (with race engine)
                          79 1000e (all original)
                          82 850g (all original)
                          80 KZ 650F (needs restored)

                          Comment

                          Working...
                          X