Announcement

Collapse
No announcement yet.

need help --- what model is this part correct for ?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    need help --- what model is this part correct for ?

    Silly question perhaps, but I've had a few GS's over the last 20 years, and I can't recall this left hand control on any.... Part # 37400-49233. everything I find converts to 37400-45373 and has the choke lever attached to the bottom of the hand control, this one does not. Thoughts ? Thanks
    20210628_175626.jpg

    #2
    Originally posted by DBaird View Post
    Silly question perhaps, but I've had a few GS's over the last 20 years, and I can't recall this left hand control on any.... Part # 37400-49233. everything I find converts to 37400-45373 and has the choke lever attached to the bottom of the hand control, this one does not. Thoughts ? Thanks
    [ATTACH=CONFIG]63033[/ATTACH]
    That one was fitted to the 1980 GS850 (and many others) and it's a great switch, but at 30 years old it gets a bit fragile and bits fall off. If that's a new one, you're in clover. While they work they're very good.
    ---- Dave
    79 GS850N - Might be a trike soon.
    80 GS850T Single HIF38 S.U. SH775, Tow bar, Pantera II. Gnarly workhorse & daily driver.
    79 XS650SE - Pragmatic Ratter - goes better than a manky old twin should.
    92 XJ900F - Fairly Stock, for now.

    Only a dog knows why a motorcyclist sticks his head out of a car window

    Comment


      #3
      I'm thinking the "80" & "81" 850, 1000, & 1100's used that switch without the choke on it, probably had the # 49233. If you look them up on the parts charts today, they show the 45373 # that has the choke on it, & can be used by just removing the choke parts. Probably the 49233 was the # & switch used on those bikes before they were replaced in "82" with the 45373 when they did put the choke on this switch...They shouldn't have changed them, the best chokes they had were on the carbs, those cable operated were always more aggravating.
      1983 GS1100E, 1983 CB1100F, 1991 GSX1100G, 1996 Kaw. ZL600 Eliminator, 1999 Bandit 1200S, 2005 Bandit 1200S, 2000 Kaw. ZRX 1100

      Comment


        #4
        Thanks - it is a new one actually. I got lucky

        Comment


          #5
          The 81 had the choke in the steering head stem. At least mine did.

          Comment


            #6
            Originally posted by Grimly View Post
            That one was fitted to the 1980 GS850 (and many others) and it's a great switch, but at 30 years old it gets a bit fragile and bits fall off. If that's a new one, you're in clover. While they work they're very good.
            Myn1150 has the same, but likely with different (longer) wiring. I had to open mine up and give it a cleaning / lube. Tricky task, but it worked out.
            sigpic
            When consulting the magic 8 ball for advice, one must first ask it "will your answers be accurate?"

            Glen
            -85 1150 es - Plus size supermodel.
            -Rusty old scooter.
            Other things I like to photograph.....instagram.com/gs_junkie
            https://www.instagram.com/glen_brenner/
            https://www.flickr.com/photos/152267...7713345317771/

            Comment


              #7
              Look at the bottom of that control. Is there a rectangular nub there? The "choke" control is a separate piece that attaches to the bottom, it does not come as part of the main control unit.

              I have converted my '80 850 to the newer '82 style "choke", and my control looks just like that.

              Comment

              Working...
              X