Announcement

Collapse
No announcement yet.

GS 750 8V Airfilterbox WARNING !

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    GS 750 8V Airfilterbox WARNING !

    My GS750 8V airfilterbox seemed to have some rust at the pipe where the venthose is connected.
    To be on the safe side with a rebuild block I removed the airvent section with a Dremel and a side angle tool (Dremel 575) and some grinding discs.
    A pain in the b. job but i got it out.
    Here is picture of the part bent open.
    This part sits above the filter so any crust that breaks loose can enter the carbs and ports !
    Attached Files
    Under no circumstances should both hands be removed from handlebars.
    (1977 owners manual)

    #2
    a few more details,
    The Dremel tool does not fit in the housing so i used a flexible shaft.
    The angle attachment does not screw to the shaft so i used a piece of metal wire to secure it.
    Next one more picture with the rust out of the section.
    r l.jpg
    Under no circumstances should both hands be removed from handlebars.
    (1977 owners manual)

    Comment

    Working...
    X