‘82 GS 1100 relay mounting plate location

[Guest]

Restoring an 82 GS1100, someone robbed a lot of the electrical components, one that came in the mail today was the relay / regulator mounting plate. It’s a quite large plate that has 2 mounting holes. Would ANYONE know how this plate mounts? My Clymer manual SUX!

[rphillips]

There's a plate under the left side cover, attached to the frame that the starter relay, fuse panel, rectifier etc. mounts to. Look up a parts diagram on Suzuki parts monster or partzilla. A picture is worth a thousand words. Good luck.

[oldGSfan]

http://gsarchive.bwringer.com/mtsac/~cliff/storage/gs/80-83_GS1100T-LT-EX-1000SZ-EZ-SD-ED-ESD.pdf

Better than Clymer

[Guest]

BikeBandit, Partzilla, Suzuki Monster all use the same pictorial diagrams, but only show “model D, and model Z” configurations for the relay / regulator mounting plate. Neither of which are for my bike....GS1100G. Thanks for the references though! I just don’t see anywhere on the left side under the cover that this plate will mount.... I suppose actual photographs of an 1100G will have be needed.

[oldGSfan]

Those are the year designators, Z for '82 and D for '83, and not the model. I'm not sure why they put both in the '82's section.

BikeBandit, Partzilla, Suzuki Monster all use the same pictorial diagrams, but only show “model D, and model Z” configurations for the relay / regulator mounting plate. Neither of which are for my bike....GS1100G. Thanks for the references though! I just don’t see anywhere on the left side under the cover that this plate will mount.... I suppose actual photographs of an 1100G will have be needed.

[Rich82GS750TZ]

There are 2 1100G Factory Service Manuals on BikeCliff's website, not sure of the difference. One is a better scan (the 86MB one), you may find clear-ish images of what that electrical plate looks like w/ everything mounted to it, and its connecting points to the frame. Link to BikeCliff's Website in my signature.

[salty_monk]

Is it a G model? From memory the regulator mounts to the bottom of the battery box on that model...

[Guest]

That manual does not cover a 1982 GS1100G. Thank you though!

[Guest]

It is indeed a G model. Have not attempted to fit this large bracket to the bottom of the battery box yet. I’ll give it a try. Thank You!

[Guest]

It was the plate in the “Z” model diagram. It attaches to the battery box with 2 screws into nut plates. The Voltage regulator attaches to the bottom of the battery box in the same manner.