These have been around a while. Just picked this up in preparation for the ride down to the BC rally.
Easy, 2 minute install, smooth on and off action. Hold throttle firmly. Adjustable set screw to adjust the tension. Does not lock(can easily roll throttle off any time)
About 23$. E bay or Amazon.
With the master cylinder, right hand switch block, and the way my handlebars curve I did not feel I had room for the Vista Cruise (with the bar clamp and extension arm) so I tried this. Fits on a stock throttle tube and grip setup. I saw they call this a vista cruise also. Just some FYI.
There is a single or double throttle cable model.The difference is just a little clip that sticks out toward the cable to snap onto it to orient/hold it vertical when loose/disengaged.
Works great, I don't have to be a fulltime member of the numb right hand club.(yes I adjusted my valves and synced my carbs STEVE!
)
It blocks the kill switch from your normal thumb flick, but that's about the only issue I have found with thus unit.
Easy, 2 minute install, smooth on and off action. Hold throttle firmly. Adjustable set screw to adjust the tension. Does not lock(can easily roll throttle off any time)
About 23$. E bay or Amazon.
With the master cylinder, right hand switch block, and the way my handlebars curve I did not feel I had room for the Vista Cruise (with the bar clamp and extension arm) so I tried this. Fits on a stock throttle tube and grip setup. I saw they call this a vista cruise also. Just some FYI.
There is a single or double throttle cable model.The difference is just a little clip that sticks out toward the cable to snap onto it to orient/hold it vertical when loose/disengaged.
Works great, I don't have to be a fulltime member of the numb right hand club.(yes I adjusted my valves and synced my carbs STEVE!
) It blocks the kill switch from your normal thumb flick, but that's about the only issue I have found with thus unit.