New owner here with Carb issues

[602busa]

[QUOTE= ALWAYS trust your own eyes... My advice, go get your bike, and handle these carbs yourself. You just might need a new set of carbs, or not... You really won't know until you get them, inspect them, and let THESE guys see what you have going on...[/QUOTE]

I do handle some of my own carb work. I just finished rebuilding my DR650 carb and I just got lazy I guess. Not only that when I brought the bike into the shop it had a host of other problems... allow me to list.

Random leaks in several places on the engine = Complete Gasket Kit $68
Worn sprocket shaft seal = $11
Rear brake rebuild was needed = $50
Fork tubes were bent = Used fork tubes $149
Rear tire rotted out from age = $135
Ignition coils were corroded = New Hi Perf Coil set $68
Exhaust was leaking = New Exhaust from Delkevic $335
Rust in the gas tank = Tank expoxied and new petcock = $375

I just didn't have the time to do all that, fortunately I had the funds lol. Now the last thing that's giving me trouble are these carbs. Hopefully the boots I bought will work out and I can put this to bed.

[Guest]

If you really want to give the RS carbs a shot, they can be made to work.

That being said I can't find anything wrong with the picture of the carbs you posted. Maybe I'm blind but I've looked a couple times and don't see anything.

One more thing is that I'd really be interested to hear how the Delkevic exhaust sounds, I have an unknown brand drag pipe on my 78' that scrapes every time I try to turn right. I had a delkevic on my CB350F and loved it

[Rich82GS750TZ]

[QUOTE=The1970's;2492530]

One more thing is that I'd really be interested to hear how the Delkevic exhaust sounds

https://www.youtube.com/watch?v=Zh8C69g4wQs

[602busa]

If you really want to give the RS carbs a shot, they can be made to work.

That being said I can't find anything wrong with the picture of the carbs you posted. Maybe I'm blind but I've looked a couple times and don't see anything.

I really do, I can tell this to anyone else thats trying to do this that the stock airbox will not fit with RS carbs. I'm going to have pods installed. I'll post a video up soon to let you know how it works out.