Quick question, does anyone know if the rubber carb flanges/boot from a gs850 will fit the intake/carbs on an 82 gs650. If not does anyone have the dimensions for the gs 850 flanges so I can reference.
Thanks a bunch!
Thanks a bunch!
-
-
The GS850 and the GS650 both use BS32mm carburetors, so the same rubber boot will fit either model carburetor boot to airbox. At the airbox end, I could not say more than probably. I am assuming you are asking about the rubber induction boot between the carburetor and air box. Not the manifold boot between the carburetor and engine.
Last edited by earlfor; 06-17-2020, 11:48 AM.Komorebi-The light filtering through the trees.
I would rather sit on a pumpkin and have it all to myself than be crowded on a velvet cushion. H.D.T. -
Thank you for the link, very helpful. I do actually mean the flanges that connect the carbs to the intake manifold. To make a long story short the 850 flanges are much cheaper than the 650.Comment
-
Yes, the 850 flanges are cheaper, but they won't fit the 650. They are a different length and have a different angle.
Check out Parts Outlaw for some of the best prices. Be sure to enter the promo code for cheaper shipping, too.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)Comment
-
No idea what they're like but these might be worth a punt:
79 GS1000S
79 GS1000S (another one)
80 GSX750
80 GS550
80 CB650 cafe racer
75 PC50 - the one with OHV and pedals...
75 TS100 - being ridden (suicidally) by my fatherComment
Comment