GS750C main loom routing to headlight bowl

[Mary Hinge]

I'm ready to pull the loom to the front of the bike now and need some advise re the routing at the headstock please. I've found various pictures and some show the loom going above the lower fork clamps/steering stem and some below. A wire & cable routing diagram I've found seems to show it going below but somehow on the bike it doesn't look right so was hoping you Guys could help. Thanks

[Gorminrider]

It might help to consult the shop manuals from other bikes..ie: I know the GS650 manuals available at Basscliffs is very plain and the main loom "bundle" is definitely from the headlight area BELOW the headstock. This is also true for my gs400s. There is actually a metal hoop attached to the frame to hold the loom in a "bight" to allow free turning of the forks. see the next picture aka "harness guide"

harness1.jpg

[Gorminrider]

harnessdetail2.jpg

This is an 82 GS 650 ...note the "harness guide"

[allojohn]

[IMG][/IMG]

HTH

[Mary Hinge]

[IMG][/IMG]

HTH

Sorry AJ, should have posted that it's the other side I was asking about, would you have a photo of that too please. It's looking from Gorminrider's example that it goes below.
Anyone else with an early 750 able to confirm ?

Many thanks, Harry

[allojohn]

Sorry AJ, should have posted that it's the other side I was asking about, would you have a photo of that too please. It's looking from Gorminrider's example that it goes below.
Anyone else with an early 750 able to confirm ?

Many thanks, Harry

Yes , that is correct. Only the clutch cable is on the left side with the taped loom going under which can be seen in the photo hooked in the wire loop.