1984 gs1100gk

[ALB80-850]

Could someone post a pic or 2 of the underside front of a 1100gk seat pan? I have a 84 1100gk with a modified 1000g seat on it. I would like to return to a oem setup. I?ve done several parts searches and have not found anything pertaining to the front mounting pins that slide into the clips near the fuel tank. Thanks in advance, any help is appreciated.

Andy

[Eli69]

I'm pretty sure Mr Redman has a GK.

New bike? I can't wait to see it.

[Burque73]

Here's one.

[ALB80-850]

That looks pretty close. I seem to be missing a spacer piece. I have 2 studs coming out of the seat pan about 2.5” long and the piece with the pins. If I put together, not enough clearance to fit the seat. I plan on fabing something unless someone has the parts they want to get rid of.

[ALB80-850]

Actually I don’t think the studs are as long as I stated. Is that a stamped steel wedge or rubber?

[Burque73]

Actually I don’t think the studs are as long as I stated. Is that a stamped steel wedge or rubber?

Wedge? Not sure I'm understanding. The spacer you mentioned in your previous post is rubber. Maybe that's the wedge.

[ALB80-850]

I believe I am referring to the rubber spacer. Anybody have an extra there willing to part with?

[Eli69]

I'm curious... are those two bolts embedded in the rubber or do the go all the way through the seat pan?

[Eli69]

I'll look through my seat parts when I get a chance, Andy.

[Burque73]

I'm sure the bolts go through the pan.

If you need to fab something, here are a few more pics. These are from my 850 but it's the same seat pan.
https://flic.kr/p/2kVaeQi

https://flic.kr/p/2kV18QY

https://flic.kr/p/2kV5G31

https://flic.kr/p/2kVamGK

[ALB80-850]

They do go through the seat pan.
Thanks Lyle, let me know. I’m on a bit of a timeline.

[ALB80-850]

Roger

Would you be willing to take the measurements of that rubber spacer and either post them or pm them to me? I believe I can make one from some scrap rubber from work.

[ALB80-850]

I missed the post with the added pics, thanks.

[Burque73]

The dimensions are
4- 5/16"L x 1-3/16"W x 9/16"H

[ALB80-850]

Thank you!