New GS750

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • hannibal
    Forum Sage
    • Jun 2015
    • 1033
    • Washington DC

    #31
    I'm pretty sure I used Suzuki Bond 1207B, the same sealant I used between the case halves.
    Jordan

    1977 Suzuki GS750 (My first bike)
    2000 Kawasaki ZRX1100
    1973 BMW R75/5

    Comment

    • sam000lee
      Forum Mentor
      • Jun 2013
      • 884
      • MA

      #32
      Okay another one. I'm doing some spring maintenance/upgrades for this bike:

      - Green Dyna coils to match the ignition
      - Fresh plug leads
      - CRM
      - Welded some exhaust leaks
      - New carb boots
      - Spark plugs, oil, etc.

      And want to get some Hagons to go on the rear. I was on https://www.davequinnmotorcycles.com/ but the contact form is broken and when I email info@davequinnmotorcycles.com it gets kicked back to me. Anybody know how to get in touch with Dave or where else I can get Hagon shocks in the US?
      1980/1981 GS450 - GS500 Cylinder + Piston Swap - "De-L'ed", custom seat, CB350 bits, 18" rear, etc.
      1977 GS550
      1977 GS750 - Cross country trip thread

      Comment

      • Nessism
        Forum LongTimer
        GSResource Superstar
        Past Site Supporter
        Super Site Supporter
        • Mar 2006
        • 35789
        • Torrance, CA

        #33
        Green coils are good for electronic ignition or Dyna S bikes, with points you want the Black coils.
        Ed

        To measure is to know.

        Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

        Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

        Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

        KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

        Comment

        • sam000lee
          Forum Mentor
          • Jun 2013
          • 884
          • MA

          #34
          I have a Dyna S installed. I'm asking about the hagons.
          1980/1981 GS450 - GS500 Cylinder + Piston Swap - "De-L'ed", custom seat, CB350 bits, 18" rear, etc.
          1977 GS550
          1977 GS750 - Cross country trip thread

          Comment

          • Charlie G
            Forum Guru
            Past Site Supporter
            Super Site Supporter
            • Feb 2009
            • 6440
            • Siskiyou county

            #35
            Originally posted by sam000lee
            Okay another one. I'm doing some spring maintenance/upgrades for this bike:


            And want to get some Hagons to go on the rear. I was on https://www.davequinnmotorcycles.com/ but the contact form is broken and when I email info@davequinnmotorcycles.com it gets kicked back to me. Anybody know how to get in touch with Dave or where else I can get Hagon shocks in the US?
            It seems they are out of bussiness (no longer trading). You may want to try the dealer in Nova Scotia.......?

            British Cycle Supply Company
            604 Davison Street RR3
            Wolfville Nova Scotia
            CANADA
            B4P 2R3
            Tel:
            +902 5427 478
            Fax:
            +902 5427 479
            Email:
            Website:
            sigpic
            83 GS1100g
            2006 Triumph Sprint ST 1050

            Ohhhh!........Torque sweet Temptress.........always whispering.... a murmuring Siren

            Comment

            • Boriqua

              #36
              Originally posted by Charlie G
              It seems they are out of bussiness (no longer trading). You may want to try the dealer in Nova Scotia.......?

              British Cycle Supply Company
              604 Davison Street RR3
              Wolfville Nova Scotia
              CANADA
              B4P 2R3
              Tel:
              +902 5427 478
              Fax:
              +902 5427 479
              Email:
              Website:
              That would suck if he is out of business... did you try this email
              David Quinn
              dqmcs@earthlink.net

              Comment

              • sam000lee
                Forum Mentor
                • Jun 2013
                • 884
                • MA

                #37
                Nope not yet. Thanks for that!
                1980/1981 GS450 - GS500 Cylinder + Piston Swap - "De-L'ed", custom seat, CB350 bits, 18" rear, etc.
                1977 GS550
                1977 GS750 - Cross country trip thread

                Comment

                • sam000lee
                  Forum Mentor
                  • Jun 2013
                  • 884
                  • MA

                  #38
                  Just got off the phone with Dave and ordered my Hagons. Really nice guy and super knowledgeable. He's only a state away from me so I should have them by the weekend.
                  1980/1981 GS450 - GS500 Cylinder + Piston Swap - "De-L'ed", custom seat, CB350 bits, 18" rear, etc.
                  1977 GS550
                  1977 GS750 - Cross country trip thread

                  Comment

                  • Charlie G
                    Forum Guru
                    Past Site Supporter
                    Super Site Supporter
                    • Feb 2009
                    • 6440
                    • Siskiyou county

                    #39
                    Originally posted by sam000lee
                    Just got off the phone with Dave and ordered my Hagons. Really nice guy and super knowledgeable. He's only a state away from me so I should have them by the weekend.
                    Well that's good news!
                    sigpic
                    83 GS1100g
                    2006 Triumph Sprint ST 1050

                    Ohhhh!........Torque sweet Temptress.........always whispering.... a murmuring Siren

                    Comment

                    • sam000lee
                      Forum Mentor
                      • Jun 2013
                      • 884
                      • MA

                      #40
                      Thought I would just update to share upgrades to my GS750 since I bought it. All with the help of GSR . Overall, I LOVE this bike! Runs great and would take it across the country (again) tomorrow if I had to.

                      - Hagon rear shocks and Sonic Fork Springs
                      - Dyna DS3-1 ignition and Dyna Green cables with a coil relay mod
                      - SH775 R/R with removed headlight loop
                      - SS brake lines up front with an aftermarket master cylinder
                      - Dunlop K70's front and back
                      - New O-rings, carbs dunked, etc. replaced intake and airbox boots with OEM
                      - Throttle + Clutch cables
                      - Oil changed every 3k miles
                      - New X-ring chain and front + rear sprockets
                      - Valve adjustments every 3k miles
                      - Welded up a couple of small patch holes on the underside of the exhaust

                      27k miles on the clock and running strong!

                      1980/1981 GS450 - GS500 Cylinder + Piston Swap - "De-L'ed", custom seat, CB350 bits, 18" rear, etc.
                      1977 GS550
                      1977 GS750 - Cross country trip thread

                      Comment

                      • GSXR7ED
                        Forum LongTimer
                        Past Site Supporter
                        • Dec 2012
                        • 10146
                        • DE via L.A.

                        #41
                        Awesome!

                        Glad to hear you are enjoying your 750. Lots of great additions/fixes too! Enjoy!!!


                        Ed
                        GS750TZ V&H/4-1, Progressive Shocks, Rebuilt MC/braided line, Tarozzi Stabilizer[Seq#2312]
                        GS750TZ Parts Bike [Seq#6036]
                        GSX-R750Y (Sold)

                        my opinion shouldn't be taken as gospel or in any way that would lead you to believe otherwise (30Sep2021)

                        Comment

                        • sam000lee
                          Forum Mentor
                          • Jun 2013
                          • 884
                          • MA

                          #42
                          Been almost two years since I've updated this but figured it's the place. Don't really have too much time for the GSR these days

                          Anyway, just installed this Delkevic exhaust last week and the Pirelli Sport Demons last year. Between ditching the crash bars and stock exhaust, it at least feels a lot lighter although maybe that's just in my head after listening to the sound of the Delkevic haha
                          Had some clutch and carb things that needed sorting out at the end of last and beginning of this year - all taken care of and the bike rips. I do want to get of the case savers that go around the points/stator cover areas so if anybody has a pair hit me up.

                          1980/1981 GS450 - GS500 Cylinder + Piston Swap - "De-L'ed", custom seat, CB350 bits, 18" rear, etc.
                          1977 GS550
                          1977 GS750 - Cross country trip thread

                          Comment

                          • steve murdoch
                            Forum Guru
                            Past Site Supporter
                            • May 2004
                            • 8491
                            • St. Catharines, On.

                            #43
                            Bike looks good, Sam.
                            That is a thick chunk of wood under the side stand.
                            Do you think it is the taller profile of the Pirellis or maybe longer Hagons?
                            2@ \'78 GS1000

                            Comment

                            • sam000lee
                              Forum Mentor
                              • Jun 2013
                              • 884
                              • MA

                              #44
                              Originally posted by steve murdoch
                              Bike looks good, Sam.
                              That is a thick chunk of wood under the side stand.
                              Do you think it is the taller profile of the Pirellis or maybe longer Hagons?
                              The bike has always leaned A LOT. IIRC it did lean a bit more after putting the Hagons on but I don't remember a difference with the tires. On a flat surface, it's okay, but if there's any uneven surface I have to be careful parking it. From what I've seen they're all like this?
                              1980/1981 GS450 - GS500 Cylinder + Piston Swap - "De-L'ed", custom seat, CB350 bits, 18" rear, etc.
                              1977 GS550
                              1977 GS750 - Cross country trip thread

                              Comment

                              • Burque73
                                Forum Sage
                                Past Site Supporter
                                • Mar 2016
                                • 4711
                                • Albuquerque, NM

                                #45
                                Sam,
                                I have two sets of case guards. Not sure what they fit though

                                If there's a way to tell I'd love to see them put to use. I have reason to believe at least one is from a 750. I'd be glad to draw a template of mounting points and mail to you, take measurements and post etc.

                                Can anyone suggest a way to confirm what I have or that they'll fit this 750?
                                Roger

                                '83 GS850G Daily rider
                                '82 GS1100GK Work in (slow) progress

                                Comment

                                Working...