.png "Powered by vBulletin")
I have use the clip on master link on all my chains, never have lost one, though I do put a dab of silicone on the clip.
-
sigpicMrBill Been a GSR member on and off since April 2002
1980 GS 750E Bought new in Feb of 1980
2015 CAN AM RTS
Stuff I've done to my bike:dancing: 1100E front end with new Sonic springs, 1100E swing arm conversion with new Progressive shocks installed, 530 sprockets/chain conversion, new SS brake lines, new brake pads. New SS fasteners through out. Rebuilt carbs, new EBC clutch springs and horn installed. New paint. Motor runs strong. -
What material wire and size do you use to wire the clip link on with?1979 GS850G
2004 SV650N track bike
2005 TT-R125 pit bike
LRRS #246 / Northeast Cycles / Woodcraft / Armour Bodies / Hindle Exhaust / Central Mass Powersport
http://s327.photobucket.com/albums/k443/tas850g/Comment
-
Real safety wire, medium size, can't remember the actual size.
Probably the size isn't all that critical.
Something like this:
I use a blob of red RTV under the clip too.Comment
-
I snapped it on and then a dab of gooey gasket shellac I had lying around.Current Rides: 1980 Suzuki GS1000ET, 2006 H-D Fatboy, 2021 BMW K1600BComment
Comment