Announcement

Collapse
No announcement yet.

i just rode a 1000g

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    i just rode a 1000g

    bone stock untouched 81 1000g....i hated the bars, but i know i want a 1100 or 1000 swapped into my 850...

    that 1000 was very impressive for an old heavy shaftie

    #2
    Yep, as nice as the 850 is, its bigger brothers simply have a little more grunt to them.

    Many think the 1000 is better than the 1100, though. The 1100 seems to be pickier on jetting and carb sync,
    meaning that it will vibrate just a bit more when things are not quite perfect.

    You look in my garage, you will see where the preferences lie, though.
    You can get a sneak peek by clicking on the links in my sig.

    .
    sigpic
    mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
    hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
    #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
    #2 son: 1980 GS1000G
    Family Portrait
    Siblings and Spouses
    Mom's first ride
    Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
    (Click on my username in the upper-left corner for e-mail info.)

    Comment


      #3
      Originally posted by gs850cafe View Post
      bone stock untouched 81 1000g....i hated the bars, but i know i want a 1100 or 1000 swapped into my 850...

      that 1000 was very impressive for an old heavy shaftie
      All things being equal,wouldn't the 850 and 1000 shafts be pretty close in weight?

      1978 GS1000C
      1979 GS1000E
      1980 GS1000E
      2004 Roadstar

      Comment


        #4
        Originally posted by Rover View Post
        All things being equal,wouldn't the 850 and 1000 shafts be pretty close in weight?

        i would assume, but ive taken about 120 or more (i forgot) lbs off my 850, also have a 4-1 an jetted carbs

        Comment


          #5
          Originally posted by Rover View Post
          All things being equal,wouldn't the 850 and 1000 shafts be pretty close in weight?
          "All things being equal", you will find that the 1000 is about 10 pounds lighter.
          In fact, the 1100G is 15 pounds lighter.

          According to All Suzuki Cycles:
          '79 850G is 558 pounds, dry. (The Suzuki Service Manual says the '80 850G is the same weight.)
          '80 1000G is 550 pounds.


          '82 850G is 557 pounds.
          '82 1100G is 543 pounds.

          .
          sigpic
          mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
          hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
          #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
          #2 son: 1980 GS1000G
          Family Portrait
          Siblings and Spouses
          Mom's first ride
          Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
          (Click on my username in the upper-left corner for e-mail info.)

          Comment


            #6
            Originally posted by Steve View Post
            Yep, as nice as the 850 is, its bigger brothers simply have a little more grunt to them.

            Many think the 1000 is better than the 1100, though. The 1100 seems to be pickier on jetting and carb sync,
            meaning that it will vibrate just a bit more when things are not quite perfect.

            You look in my garage, you will see where the preferences lie, though.
            You can get a sneak peek by clicking on the links in my sig.

            .
            One of my 1000G's has a 1983 1100G engine in it. That is the best of my three. The 1100 (and '82 and on 850) are less comfortable and not as good looking as the earlier 180/1000G. They just got a little bit more "L" like. In '83 they got a nasty dished seat that made them even worse. I bought one of those new, an 850, and it was far worse than the '81 850 I had at the same time.

            I'm one of the few people who likes the stock bars. They are for 65 mph and below, I will admit. Abofe that, you really need something that leans you into the wind more. I don't cruise that fast. At least the bars are replaceable.

            Even with the taller gearing, the 1000 or 1100 pulls much harder than the 850 at low and mid range RPM, and cruises far less annoyingly at fewer RPM. The 850 is still a great bike, and the one of mine with45,000 miles is the smoothest GS I own, hands down. The rest, 850's, 100's, chain and shaft are a toss up on smoothness. All are acceptable in my book.
            Last edited by 850 Combat; 03-16-2013, 11:37 AM.
            sigpic Too old, too many bikes, too many cars, too many things

            Comment


              #7
              My favourite Suzuki GS in stock form
              1980 GS1000G - Sold
              1978 GS1000E - Finished!
              1980 GS550E - Fixed & given to a friend
              1983 GS750ES Special - Sold
              2009 KLR 650 - Sold - gone to TX!
              1982 GS1100G - Rebuilt and finished. - Sold
              2009 TE610 - Dual Sporting around dreaming of Dakar.....

              www.parasiticsanalytics.com

              TWINPOT BRAKE UPGRADE LINKY: http://www.thegsresources.com/_forum...e-on-78-Skunk/

              Comment


                #8
                I got a 1000G a few months ago. Not crazy about the turn signal controls or the dash so I changed both out for different. It's a very smooth bike at 100 MPH I tell you that,
                1981 GS650G , all the bike you need
                1980 GS1000G Power corrupts, and absolute power corrupts absolutely

                Comment


                  #9
                  I have a 1000G and it is my favorite . I've had alot of different models and makes and this is my all time favorite. I've had sport bikes, touring bikes, almost all style's except a Hardly, I have ridden them and they didn't do much for me. Could be my mind set and didn't give them a chance but no real wow factor for me. But the GS1000G in my mind does everything well that I want it to.
                  1984 GS1100GK newest addition to the heard
                  80 GS 1000gt- most favorite ride love this bike
                  1978 GS1000E- Known as "RoadKill" , Finished
                  83 gs750ed- first new purchase
                  85 EX500- vintage track weapon
                  1958Ducati 98 Tourismo
                  “Remember When in doubt use full throttle, It may not improve the situation ,but it will end the suspense ,
                  If it isn't going to make it faster or safer it isn't worth doing

                  Comment

                  Working...
                  X