Announcement
Collapse
No announcement yet.
smoked on the first run!!!
Collapse
X
-
80gs1000e -
Anonymous
leaving the line
First off your bike is Not designed to leave tha starting line like a drag bike. Reving the motor and dumping the clutch will either bog the engine ,or if it has good power do a wheelie or blow the rear tire loose, depending on where your weight is placed. If you have to race guys be prepared for your bike to pay the price. You rev the motor up into the power band and hold the rpm say 7500 (I don't know you bike) and when the light goes green you have to slip the clutch hard as you twist the throttle to keep the revs even at your set rpm. You will have to punish your clutch by slipping it for a long time at high revs to leave hard. You basically use your clutch hand as a clutch timer just like the dragsters.
Comment
.png)
Comment