HELP oil fill cap on. Clutch cover case broke while changing oil

[Guest]

Is there an alteritive way to add motor oil besides the obviouse oil fill hole ppz z help I dony know wgat to do

[bonanzadave]

Gotta be a first here. Broke how ? Pic ?

[Steve]

Very hard to read and in the wrong forum.

.

[Cipher]

Did you break the tab off? You might be able to get a vise grip on the periphery.

[azr]

Look under the engine, you'll see a large nut, 21mm if my memory serves me right. Put the bike on it's side stand, put something soft on the ground and slowly and gently tip the bike over to it's side then continue to flip the bike over onto it's handlebars. You can use some wood or straps at this point to hold it steady but it 'should' balance quite well with the bars and seat. Now you have easy access to that nut, take it off and put in the approximate amount of oil you need then simply flip the bike back over. Oh, don't forget to drain the tank or you'll spill some gas.

[bobgroger]

Look under the engine, you'll see a large nut, 21mm if my memory serves me right. Put the bike on it's side stand, put something soft on the ground and slowly and gently tip the bike over to it's side then continue to flip the bike over onto it's handlebars. You can use some wood or straps at this point to hold it steady but it 'should' balance quite well with the bars and seat. Now you have easy access to that nut, take it off and put in the approximate amount of oil you need then simply flip the bike back over. Oh, don't forget to drain the tank or you'll spill some gas.

You have been marooned on that island too long.... WILSON!!!

[derwood]

fix what you broke,
take the clutch cover off and have it repaired or replaced...

[sam000lee]

Look under the engine, you'll see a large nut, 21mm if my memory serves me right. Put the bike on it's side stand, put something soft on the ground and slowly and gently tip the bike over to it's side then continue to flip the bike over onto it's handlebars. You can use some wood or straps at this point to hold it steady but it 'should' balance quite well with the bars and seat. Now you have easy access to that nut, take it off and put in the approximate amount of oil you need then simply flip the bike back over. Oh, don't forget to drain the tank or you'll spill some gas.

Use some penetrating oil so you don't strip the threads on the oil bolt.

[earlfor]

CAN'T ANYONE READ THE HIGHLIGHTED YELLOW BAR AT THE TOP OF THE PAGE THAT SAYS;

THIS FORUM IS MEANT FOR QUESTIONS CONCERNING THE FORUM ITSELF. not NOT NOT not...GS RELATED QUESTIONS.

DAMN PEOPLE, LEARN TO READ.

If you posted a tech question here, you need to delete your post.

[Cipher]

Oh my all caps. Your shift key broke on the on position?

[bonanzadave]

If you posted a tech question here, you need to delete your post.

No. It says your post will be deleted. Shesh Earl, cant you read !

[chuck hahn]

yes on some channel locks or vice grips to unscrew the oil fill cap. If the threads are all jacked its time for new clutch cover with an oil cap already in it from a member here or Ebay.