Ok have a 1984 GS1150E have a mechanic that seems capable.... always suspicious due to hard to test these units. Says CDI is gone. So a little hard to find and even so big $$$ out of country. I came across a used 83 GS 1000 one same look and plug in but with different part #, for $80, probably double that with shipping duty. Do you think that would work. Dyna 2000 seems to have but again kind of big bucks. Little apprehensive buying used for large $ when they really cant be tested without swapping into another bike. Thoughts comments appreciated
-
-
You need to post this in the Electrical forum.
This forum is for questions about the GSR itself
And, turn off the bold and tell us why you think it needs an ignitorLast edited by Big T; 04-18-2018, 11:41 PM.1978 GS 1000 (since new)
1979 GS 1000 (The Fridge, superbike replica project)
1978 GS 1000 (parts)
1981 GS 850 (anyone want a project?)
1981 GPZ 550 (backroad screamer)
1970 450 Mk IIID (THUMP!)
2007 DRz 400S
1999 ATK 490ES
1994 DR 350SES -
I have to agree with Big T.
This is the wrong forum.
It's hard to read with large bold print.
"CDI gone" is almost correct. You never had one on the bike to start with.
The '80 unit will likely not work with your '84, unless your bike has centrifugal ignition advance on the crank.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)Comment
-
It might be possible to use a Dyna S and a centrifugal advance unit from an 1100E. I have no personal experience with this but have read about the mod before. Hopefully someone here can chime in with more definitive data.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-ResurrectionComment
-
I had a 85 GS1150E for about five years. The factory electronic ignition gave up the ghost and died after the first two years. I replaced it with a Dyna 2000 electronic advance which also died a couple of years later.
I then replaced that with a Dyna S for an 83 1100. The Dyna S requires a mechanical advance unit. The 1150 does not have one, but the machining on the crank end is still there for one. A mechanical advance from a GS 850 is a drop in, no brainer to install.
It fits perfectly. (other mechanical advance units would probably work also, but that is only a guess)
Get a Dyna S for a 1983 1100. Get a mechanical advance from a GS 850.
They are both plug and play, no mods needed.
The rotor installed on the crankshaft will be 1/2" taller than the stock 1150 electronic setup. You will need the case cover from a 83 1100 because that year cover is 3/4"
deeper/taller than the stock 1150 case cover is. You will be good to go, no modifications needed.Last edited by earlfor; 04-21-2018, 06:28 PM.Komorebi-The light filtering through the trees.
I would rather sit on a pumpkin and have it all to myself than be crowded on a velvet cushion. H.D.T.Comment
-
Well I have two 1100ed ignitorsComment
Comment