Suzuki Parts--Exhaust valves for oil cooled DOT heat.

[Roger P.]

Anybody have a line on a good source of affordable parts? I need a set of 8 exhaust valves for a 1991 Katana 750 head on my Bandit 1200. I mis-timed my exhaust cam last summer and bent the valves. I took the valves out of my Bandit head, thinking they were the same size, but while the heads are the same, they are 3mm shorter. Any advice gratefully accepted. I am eager to get these RS38s put to work!

[GregT]

Back when I was building a lot of the air/oil GSXR's I found it was cheaper to buy aftermarket stainless valves than OE Suzuki.
That may be a local pricing peculiarity.

[Carter Turk]

I have a bag of 90 gsxr1100 valves, probably wrong size though.

[Roger P.]

I have a bag of 90 gsxr1100 valves, probably wrong size though.

Probably. Seems the Kat750 (88-97) and the GSXR750 (88-89) are special. I bit the bullet and ordered new from Ebay and Partzilla. The good part is I now know those RS38s are not THAT loud!

[Carter Turk]

What size are they? I thought I saw 25mm ex.

[Roger P.]

What size are they? I thought I saw 25mm ex.

They are the same size as Bandit 1200 valves except 3mm (3.5mm?) longer.