Help I'm an idiot!!!!

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • Guest
    #16
    stress

    Originally posted by Big T
    Good for you

    Now, go have a beer and tackle the rest of the project later
    I got so stressed reading this tread I had to start drinking!

      Comment

      • Steve
        GS Whisperer
        • Jun 2005
        • 35925
        • southwest oHIo
        #17
        Originally posted by terrylee
        ... plan to do a valve check tomorrow while have cover off.
        Did you know that while you had the cams off would have been the PERFECT time to inventory your shims (if you hadn't already done them previously)?

        .
        sigpic
        mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
        hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
        #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
        #2 son: 1980 GS1000G
        Family Portrait
        Siblings and Spouses
        Mom's first ride
        Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
        (Click on my username in the upper-left corner for e-mail info.)

          Comment

          • Guest
            #18
            Originally posted by Steve
            Did you know that while you had the cams off would have been the PERFECT time to inventory your shims (if you hadn't already done them previously)?

            .
            Pretty sure I remember a thread where he's done that not so long ago Steve, so I believe you can rest easy on that one

              Comment

              • Steve
                GS Whisperer
                • Jun 2005
                • 35925
                • southwest oHIo
                #19
                OK.

                .
                sigpic
                mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
                hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
                #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
                #2 son: 1980 GS1000G
                Family Portrait
                Siblings and Spouses
                Mom's first ride
                Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
                (Click on my username in the upper-left corner for e-mail info.)

                  Comment

                  • Guest
                    #20
                    Originally posted by Steve
                    OK.

                    .
                    Haha it was still a great reminder just in case Steve, I just swear I remembering reading about this in a different thread...

                      Comment

                      • terrylee
                        #21
                        She's ok!

                        Thanks for the shim reminder, but I did check them in March, but checked everything again before putting cover back on. All still in spec. right the way I left them in March. Got everything back on and cam chain tensior set and the bike is running well and starting easily! Wife hasn't had a chance to take it out for a ride, hopefully tomorrow. Again I can't thank everyone enough for everything, all the great advise and helping me not loose my mind. I am a little proud I was able to do all I did for the first time and do it right. terrylee

                          Comment

                          • Guest
                            #22
                            This is excellent news Terrylee! Had me worried when you posted the thread, glad it has a happy ending

                              Comment

                              • terrylee
                                #23
                                Me too! Not a religous man but did thank god! And all on here! terrylee

                                  Comment

                                  Previous 1 2 template Next
                                  Working...