Tappets

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • nino
    • Feb 2026

    #1

    Tappets

    Hi all, I need to adjust the tappets on my 82 GSX 400 T and am having difficulty setting the engine up on the right timing marks to start the adjustment. The Haynes manual is quite confusing, which is cylinder 1
    so I can find TDC and set the cams in the correct position to start with the adjustment sequence?

    Thanks in advance.
  • Guest

    #2
    As you sit on your bike, number one cylinder is on the left side. Wish I was more familiar with your model, but we didn't get those here. Ray

    Comment

    Working...