high idling and no throttle acclearation

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • amg96
    • Mar 2026

    #1

    high idling and no throttle acclearation

    My 1987 gs 450 will start up and warm up fine for about 5 mins. i give it some throttle and sometimes it just sticks at the high rpms and wont go down than after the bike is warm you will suddenly here it slowing down and pretty much bogging out the only way to keep it running is to twist the throttle fully and it will only be a 1,000 - 2,000 rpms and if you let off it, it will stall. the carb has been fully cleaned along with 2 new rubber slides in the carb checked the hoses and no air leaks please help me with this!
  • Nessism
    Forum LongTimer
    GSResource Superstar
    Past Site Supporter
    Super Site Supporter
    • Mar 2006
    • 35808
    • Torrance, CA

    #2
    Please check the newbie mistakes thread linked in my signature to see if anything helps.
    Ed

    To measure is to know.

    Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

    Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

    Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

    KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

    Comment

    • Guest

      #3
      Originally posted by amg96
      My 1987 gs 450 will start up and warm up fine for about 5 mins. i give it some throttle and sometimes it just sticks at the high rpms and wont go down than after the bike is warm you will suddenly here it slowing down and pretty much bogging out the only way to keep it running is to twist the throttle fully and it will only be a 1,000 - 2,000 rpms and if you let off it, it will stall. the carb has been fully cleaned along with 2 new rubber slides in the carb checked the hoses and no air leaks please help me with this!
      Welcome to the forum. I didn't even know Suzuki still made a GS450 in '87. We'll need more information, are you using pods? Did you re-jet if you are? Have you at least bench synced the carbs Did you fully disassemble the carbs and soak them or just spray with spray cleaner? Did you replace the intake O-rings?

      Comment

      Working...