Clutch installation

[Guest]

When i am istalling the clutch, and tightening my bolts with the springs, do i want to have the rest of the clutch adjustment stuff (the tension on the pushrod, cable adjustments) kind of normal. I was lubing the cable and such, do u want to put all that back the way it was before tourqing down the springs?

[Rensdw]

No, the clutch and the clutch operating system are two seperate things, you can install the clutch and then the pushrod later.
I don't like to do it, but you can even remove the pusrod from an engine without taking the clutch cover off.

[Gorminrider]

as Rensdw is saying, the adjustments are to the pushrod but you don't really want to be putting the clutch back in while pushing against it so

do i want to have the rest of the clutch adjustment stuff (the tension on the pushrod, cable adjustments) kind of normal.

I would slack all the adjustments off..(ie: on a 450 it's turn all the adjuster screws in) then Put your clutch together, then Re-adjust, starting with the pushrod ajustment under the left casing, then the hand lever adjustment.