I?m trying to install a clutch cable on my 81 450. It appears I am missing a couple of parts. On the end that connects to the sprocket housing I am missing a spring and some kind of nut that connects the cable to the actuator. I was looking at bike cliffs website and saw the instructions for a 550 and that?s how I determined I was missing the parts. Now, on the microfiche at Partzilla.com, I can?t locate either the spring or the nut. Any help please?
-
-
In the "clutch" tab of the fishe it shows a spring. The nut typically comes with the cable If I'm understanding your problem correctly.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection -
There is no hardware to connect the cable to the actuator. It feeds into the top of it and a tab (on the right side in fig 4.14) is bent under to keep it from dropping too far down.clutch.jpg2001 Kawasaki Voyager XII (Current bike)
1982 GS450txz (former bike)Comment
-
That’s a picture I haven’t been able to find. In my service manual it doesn’t even reference the cable assembly. Is there any chance you could enlarge it? When I zoom it is too blurry to make out.Comment
-
That came from the Haynes repair manual, you can download it here: http://gsarchive.bwringer.com/2001 Kawasaki Voyager XII (Current bike)
1982 GS450txz (former bike)Comment
Comment