Announcement

Collapse
No announcement yet.

Rebuild

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Rebuild

    I'm replaceing the valve stem seals, do I have to hone the bores, not replaceing the rings. Head & barrels removed.

    #2
    Huummm, I wouldn't have removed the barrels to replace the valve seals. "BUT" while that far in, I'd measure the bores, and after confirmed all are good, hone and install new rings (back to like new cond.). Don't know if honing will be good for old rings, but shouldn't hurt anything.... All just my opinion.
    1983 GS1100E, 1983 CB1100F, 1991 GSX1100G, 1996 Kaw. ZL600 Eliminator, 1999 Bandit 1200S, 2005 Bandit 1200S, 2000 Kaw. ZRX 1100

    Comment

    Working...
    X