.png "Powered by vBulletin")
The bolts for my exhaust pipes broke off in the cylinder head on my 1981 GS 450 L so I was wondering if I should just buy a head off ebay seeing as I've attempted to extract them with no success. Also can I put a 1980 Suzuki GS 450 E head on it?
-
-
Should be the same head but you might want to go to one of the various On-line parts fishe and check the part numbers for things like the valve cover since Suzuki sometimes changed these parts over the years.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection -
Those motors were about the same from 80-88.1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
1985 GS1150ES stock with 85 Red E bodywork.
Comment
Comment